Search results

I think the Jeeps official weight capacity is around 1180 lbs. Basically 1/2 a ton of Cargo and a driver.

I did check continuity and I got nothing. maybe a quick bleep on the multi-meter after few clicks of the switch but that's about it. During the Summer time the rear glass would randomly pop if the jeep was unlocked. further more the latch would continuously activate even after it's open. Maybe...

So I pulled off the tailgate panel today. I can see the micro switch has some corrosion on it. Not surpised but I still wanted to confirm it was the micro switch causing the issue. So I took a small piece of wire and used it to jump together the two prongs on the female connector that's on...

Yup, I understand.

Hopefully mine can be repaired like that. Once the weather warms up i'll have to pull it part and do some testing. Thanks for the input.

Hey guys, So I decided to put some tools in my Jeep today and when I pulled on the tailgate handle the Glass latch would not release. However, the rear glass latch will release when when I use the tailgate unlock on the FOB and work every time I use the FOB. This isn't the first time the...

Yea i realized what you meant by CC when I was driving around yesterday. I didnt think of it at time of my previous post bc I was thinking of items related the TC and ESP.

I had all those lights come earlier this year. The TC,ESP and ABS where all disabled. It was a bad ABS sensor. My mechanic took care of it for about $85 (diagnosing, part and install). Question though. When you say CC, Do you mean TC for Traction Control?CC doesn't ring a bell for me.

I knows There are two styles of plates for the windows regulators for the KJ. One that uses Pins to hold the window on and another that uses a clip that the window just slides into and locks on. I believe the one with the pins are the better of the two because when I had my front windows...

Mobile 1 full synth and pure one filter or Mobile Filter. Used to changed my oil twice a year but I'm lucky if I put on 4K a year and it seem a waste of money to change oil every 2k when it's good to like 15K. so I've been doing it once a year.

I had my compressor and condenser replaced a year ago. Cost about $800 from my Mechanic.

I had something like this happen 2-3 years ago. It was night, on my way home. I was going over Rail road tracks and soon as I finished crossing them all my warning lights came on. then the dash, radio and exterior lights turned off for a second and then all lights turned back on like normal. No...

LED's are street legal. Plenty of new cars come with them as side markers, tail lights and DRL's . Some even use LED for Head lights.

Get mirrors. Put one on the back seat and the other near the rear view mirror and align them so the baby's face can be seen. Have this setup in my jeep and it works good. EDIT. Yea I didnt realize the time stamp on previous posts. I wondering what tommudd ment by 9 years later. Long day at...

Still got my plugs from the factory. My KJ just rolled over on to 51K. Still getting an avg of 16-18 MPG in city.

I added an X Gauge in to read the trans temp. I used one of the codes on this page if I remember correctly. Dodge Specific : Linear Logic : Home of the ScanGauge Now.. My 06 KJ has a CAN computer system. Your 03 might not. My fathers 05 KJ doesn't have a CAN system b/c the code for trans...

Rotate the tires every 3000-4000 miles and you'll be fine. I bought my jeep new with 17 miles on it. At about 3500 miles in I noticed cupping on front passenger. I've had several alignments over years but still at 3000-4000 miles I had cupping. on my Second set of tires now and they do the...

Alrighty, Here's the response I got from there Support. "The ScanGauge will only read and clear trouble codes that cause the check engine light." Now, I never had any tranmission issues so.. Does the KJ turn on a seperate indicator for transmission issues?

It may.. I found this on there site Dodge/Chrysler/Jeep Testers : Linear Logic : Home of the ScanGauge If i understand it correctly, the device can detect firmware ver of PCM and TCM for some testing there doing. So it looks like It can talk to the TCM. I use my scangaugeII to monitor...

ScanGaugeII will read codes and do a lot more. got mine for $150 a year ago.