Search results

  1. C

    Cold Weather Starting

    When I can't plug in the Jeep, I recently tried cycling my glowplugs when it is lower twenties (f) and colder. I'll turn the key on, wait until the chiming stops, turn it off and repeat 3 times, then crank it to start. Seems to help. Not sure if it is ******* the glowplugs. I think they are...
  2. C

    Best OBDII Scanner for CRD?

    My Foxwell scanner shows very little data and is basically worthless. My Ancel FX3000 shows a lot more info and allows cycling of the abs module to bleed the brakes, but still doesn't do everything.
  3. C

    Soundproofing

    I put some self adhesive high density foam with a foil facing on the firewall and under the carpet and under the hood in a couple of trucks and it made a big difference. It was some no name brand on ebay.
  4. C

    2006 KJ CRD Cherokee (Liberty In US)

    Check you shift linkage at the transfer case. Mine had a broken fitting and had come off. The dealer couldn't find the part number in the KJ files, but found one from a TJ that worked.
  5. C

    2006 Liberty Front End Howl - Not a wheel bearing

    I had similar noises from my front end and no play in the CV joints. Replaced the half axles anyway and that fixed it. I also notice that there are some small heat shield between the lower ball joint and the rotor, that if dislodge could rub on the rotor.
  6. C

    front axle pieces parts

    I just replaced both my front half axles (with cv joints) on a 2006 Liberty CRD. I didn't replace any bearings or bushings when I did the job. I didn't look inside the differential, but on the outboard end (at the rotors), the only bearing I noticed was in the hub, which is a replaceable as a...
Top