Search results

So from what I am reading 1/2 inch will give you 1 inch of lift. Is pushing it up 1 inch too much?

How high can you push the strut up in the clevis? Is 1 inch too much? That would add 2" to the height of the front, correct?

That was our other thought to get a set of springs OEM from Amazon so we could return if not a fix. The more I look at this the more I think someone put in taller springs but will not know until I remove one and check it's height. I know the ones that are the OEM from MOOG are 11.1 inches...

Here is an image of this beast. I here you but replacing the front struts in not something at this time we can afford.

OK finally got to measure the front again and the rear. From the center of the wheel to the outside edge of the fender flare is 17.75" for the front and 20.50" for the rear. We have decided to first try some Superior 18-1201 Spring-Lox,2-Way Adjustable Spring Spacer we found on Amazon. We can...

I took a hard look at the front end with both wheels off while checking the other front end components. The springs are not compressed and the shocks look new. We are just going to try the springs in the back. If they do not do anything we can return them. Fortunately, it is not that hard to...

We disconnected the rear shocks and the height stayed the same in the rear. We then placed a floor jack under the frame and raised it up to 19" and it still looks the same. The rear end is really high. We are going to order some moog 81057 springs and see what they do. From my research...

Measured the 2005 jeep 4x4 from the rubber fender trim to the center of the front wheel and it was 17.25". Is that the right way to measure or should it be from the edge of the metal fender? We also looked closer at the rear shocks and they are heavy duty shocks so we unbolted them at the...

Just out of curiosity, what are the correct measurements for the front and the back? Also wondering if I was to lift the chassis up to the correct height in the front if it would then shift some of the weight to the back and make it move downward. When I get a chance to measure all of this I...

OK I will measure both the front and the rear. So what you are suggesting is to buy quality shock overs for the front at the very least

I bought a used 2005 Liberty and the rear end is much higher than the front. No lift kit is seen in the rear. To make this back to normal height what should I do? Replace the rear springs? What is the part number? Do I also need to replace the shocks? Part number? Can I just use a spring...