Search results
-
8
DIY Front Bumper
Bilstein 5100/4600 OME 927/948 ( the heavier weighted one up front but not the crd ones might not be right numbers) I agree that it would have been easier to not cut out the stock signals. I just didn't like how after removing the stock plastics you have to cut the signals away from the bumper...- 808inthe949
- Post #5
- Forum: KJ General Discussion
-
8
DIY Front Bumper
I do not know what the ARB mounts look like (guess I should have really looked over the dimensions or at least inner photos to see frame work) but I mounted by sandwiching the unibody rail through the center with a 2.5x3 square bar and a 1/4 bottom plate using grade 8 bolts. Started with...- 808inthe949
- Post #3
- Forum: KJ General Discussion
-
8
DIY Front Bumper
Spent the last two weekends making a bumper for my liberty. I could only find ARB that sells one and judging from posts on here there's not a lot of options. I opted to try and make one that was a kind of mix between two styles that I like. I know I'll face some criticisms with this one. I'm not...- 808inthe949
- Thread
- Replies: 116
- Forum: KJ General Discussion
-
8
Recommended fuel pump replacement?
Delco was my first choice. Will be going that route if this one doesn't pan out- 808inthe949
- Post #8
- Forum: KJ General Discussion
-
8
Recommended fuel pump replacement?
Wow sir a carquest one! Glad it's working for you. I read a post from a member about using the complete assembly from Amazon. He had an issue with the first one he was sent but the second one they sent him to replace the faulty first one, has worked great for the last year. I'll post after I...- 808inthe949
- Post #6
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
Ah ok. When crossing deep water how would you block off the new intake opening? Just stuff something into the hose, or is there a ****** type thing you use?- 808inthe949
- Post #16
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
Ok from behind grill. Is the 3" hose coming out of the grill on the bottom right of the headlight or the bottom left by the outer edge of the bumper?- 808inthe949
- Post #14
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
Here's a pic of my 05. The radiator support goes up almost all the way to the headlight- 808inthe949
- Post #12
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
That's the same for the 05? I have all the plastic off right now (fabing a bumper) and there doesn't look to be a opening large enough for the hose unless it's kinked closed somewhat. There's a triangular price of plastic that sits under the lower right side of the passenger headlight (looking...- 808inthe949
- Post #11
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
The intake on my air box is shaped like a snorkel in that it terminates at a slim opening that is right on top of the cross member just below where the hood opens. If I remove the "snorkel" piece it has a oblong shaped opening that is now facing towards the sky. I can modify that to make a 3"...- 808inthe949
- Post #9
- Forum: KJ General Discussion
-
8
Cold air intake and snorkels
Hey Tom is the 03/04 the same setup as the 05? Looking at my air box with the grill and front bumper off, I'm not sure where a 3" tube would fit with how the radiator support is located. Do you have a post or thread going over this mod?- 808inthe949
- Post #6
- Forum: KJ General Discussion
-
8
2.5" spacers
I'm not sure as to why some would have issues and some wouldn't. As far as my experience and a percentage of the ones I have seen, the coil contacts the control arm at full droop and caused some damages. An alignment didn't solve my issue. The new control arms and the spacer lift would have...- 808inthe949
- Post #34
- Forum: Tires / Wheels
-
8
2.5" spacers
I wish more people would just listen to the moderators here. The spacers mess with the geometry of your suspension. The way the front end is designed whatever you add gets doubled essentially. So a 2" spacer gives more than the 3.5" that is allowable for clearance between suspension parts...- 808inthe949
- Post #28
- Forum: Tires / Wheels
-
8
Boiler's 3/8" shims or equivalent?
That is awesome to hear. Ill grab those from ATH and see what else they have. Thanks- 808inthe949
- Post #18
- Forum: Lift Kit Discussion
-
8
Boiler's 3/8" shims or equivalent?
I have literally never seen someone rave about RRO. Almost every post that mentions them is a negative review or opinion. I know the product is just a metal shim plate but there could still be fitment issues, poor steel quality, and possibly worst of all, poor customer service. I have never...- 808inthe949
- Post #15
- Forum: Lift Kit Discussion
-
8
Porting TB. Need to clean IM?
Might not be viable for my KJ but possibly for my fiances WK. Even if I do a larger throttle body I wouldn't get a benefit (I'd there is one to be had) unless I had a pcm tune?- 808inthe949
- Post #9
- Forum: KJ General Discussion
-
8
K&N Cold Air Intake
I'm not building a racecar just a slightly better performing (whether wheels to road or in the gas tank) brick on wheels.- 808inthe949
- Post #36
- Forum: KJ General Discussion
-
8
K&N Cold Air Intake
YouTube is great as a way to find a direction to fixing an issue.- 808inthe949
- Post #35
- Forum: KJ General Discussion
-
8
K&N Cold Air Intake
You said it brings in more air but isn't really noticeable. Why do you do it on all your rigs if it doesn't make much of a difference?- 808inthe949
- Post #34
- Forum: KJ General Discussion
