Search results
-
M
Power door locks
Everything else works fine,I figured that if the battery can start the engine no problem the draw from locks should not make a difference, especially considering their behaviour doesn't change when the car is on with everything else running. I'll get the battery tested today just to make sure...- Madlh24
- Post #5
- Forum: KJ General Discussion
-
M
Hi guys gals 07 liberty issue
Could also be a bad/dirty ignition switch. But always check your battery first, could be as simple as loose terminal connector and or corrosion on posts and connectors. Then, while the battery might have enough power to run the electronics, it might not have the cranking amps to turn the engine...- Madlh24
- Post #5
- Forum: KJ General Discussion
-
M
Power door locks
The PO didn't have the key fob, but from the build sheet I got from Chrysler it should, I'm working on getting a replacement.- Madlh24
- Post #3
- Forum: KJ General Discussion
-
M
Hi guys gals 07 liberty issue
Check your battery, might be low on fluid(if it's serviceable). Also, check the battery posts and connectors for corrosion and make sure they're tight. You can Take it to any car parts store to have it tested for amps, it could still be putting out 12v but not have enough cranking amps.- Madlh24
- Post #2
- Forum: KJ General Discussion
-
M
Power door locks
Just got the jeep last week. The power locks will work the first couple of times, unlock, lock, but then it seems like they lose power...? Every time I use the switch, doesn't matter which switch, they function less and less, As if the battery is dying. So if I unlock they work, but if I lock...- Madlh24
- Thread
- Replies: 19
- Forum: KJ General Discussion
-
M
Just bought a liberty
Got the new sway bar links installed and now the Jeep rides more stable, I'm still getting the kick in the rear from the worn LCAs but I'm no longer feeling it throughout the whole body and in the steering wheel. It just feels like it's wagging it's tail now. The LCAs will be here next week...- Madlh24
- Post #19
- Forum: KJ General Discussion
-
M
Just bought a liberty
Ok.just ordered the mopar arms, should be here in a week. The sway bar links should be here today, will be installing those today. From the tightening I did earlier, they should at least help.- Madlh24
- Post #17
- Forum: KJ General Discussion
-
M
Just bought a liberty
Ok, when I did the test I felt a bit of wiggle,I got underneath again but they look ok. I took out my camera and got as close as I could and I was able to see some tears . On both sides. I'm looking at the bushings on rock auto but I'm getting 4 different ones from mopar and when I look at the...- Madlh24
- Post #15
- Forum: KJ General Discussion
-
M
Just bought a liberty
Tommudd, what do I do with the socket and extension exactly? I checked their recall site with my vin and only shows the gas fire recall as incomplete. I'll be taking it in to take care of it. But, there was no mention of a Ica recall, just the front ball joints(complete).- Madlh24
- Post #12
- Forum: KJ General Discussion
-
M
Just bought a liberty
Ok, after tightening the link the jeep stopped doing the twisting, for a bit, but after a while it started coming back, not as bad though. I went ahead and ordered 2 New links, no parts stores had them in stock in my area not to mention they're like $15 less on Amazon.- Madlh24
- Post #11
- Forum: KJ General Discussion
-
M
Just bought a liberty
The RLCAs look ok too . Is there a way to check if they got replaced with the recall? Other than actually going to the dealership. I tightened the sway bar link but seems the bushing is completely shot regardless. I have some on order now. I'll see how it rides with it tightened now, I'll get...- Madlh24
- Post #8
- Forum: KJ General Discussion
-
M
Just bought a liberty
Just checked the rear upper control arm, the bushings and the ball joint don't look worn or loose, felt them and they feel solid, no wiggle or tearing.- Madlh24
- Post #6
- Forum: KJ General Discussion
-
M
Just bought a liberty
No noises and the jeep doesn't pull or veer once it's settled into the decel/accel position- Madlh24
- Post #5
- Forum: KJ General Discussion
-
M
Just bought a liberty
Sway bar link Upon further examination,I missed it the first time I checked apparently, the nut for the bolt on the front right sway bar link is loose, the bottom one that connects to the lower control arm. Would that be enough to cause such dramatic results? Now that I've been driving it...- Madlh24
- Post #4
- Forum: KJ General Discussion
-
M
Hello!
Just bought my first jeep. 2004 liberty with 160,000 miles. Excited for what is to come with this.- Madlh24
- Thread
- Replies: 5
- Forum: Introductions
-
M
Just bought a liberty
Hello, just bought a 2004 jeep liberty. It runs great! I'm having an issue with it though. During acceleration the jeeps body feels like it shifts to the right and during deceleration it shifts to the left. It pulls on the steering wheel. It only does it when switching between deceleration and...- Madlh24
- Thread
- Replies: 20
- Forum: KJ General Discussion
