Search results
-
D
Sensor
During routine light bulb maintenance on a 2011 KK, I found one of these below the turn signal indicator bolted to the frame on the left & right sides. Does anyone know what it is/does? Only speculation but could it be the crash sensor which will cause the airbag to deploy?- Drag Line
- Thread
- Replies: 8
- Forum: KK General Discussion
-
D
Alternator & Serpentine belt replacement.
I did check the rotation on each pulley, there is no grinding or binding at any point. They turn smoothly & appear to stay within alignment with no fore/aft wobble. Neither maintain a fast, free spin of more than 2 revolutions after the initial turn. I don’t think the sealed bearings are under...- Drag Line
- Post #6
- Forum: KK General Discussion
-
D
Alternator & Serpentine belt replacement.
2011 KK Renegade. Bought New off the lot to replace an Outback with a slipping CVT transmission. The idler is steel but the tensioner is plastic. There is no perceptible play in either, side/side or up/down. Should I replace both anyway or replace the whole idler assembly? What is EPDM...- Drag Line
- Post #5
- Forum: KK General Discussion
-
D
Alternator & Serpentine belt replacement.
Hi all, 70k+ miles & the alternator burned up. I will replace with a new alternator & I was thinking I should replace the belt as well. Should I also consider replacing the Idler & Tensioner pulleys as well? I looked to see if there was a write up on this but didn't see one. Do these...- Drag Line
- Thread
- alternator
- Replies: 7
- Forum: KK General Discussion
-
D
CENTRAL LOCKING PROBLEM
Look at the posts on how to replace the rear window motors in the KJ or KK forum tech. That should get you into the area you want to investigate.- Drag Line
- Post #2
- Forum: KK General Discussion
-
D
End of an era
Glad you are OK. Sheet metal can be replaced. I've seen a lot of KJs in the non rust belt areas for sale in mostly 4x4 so they're out there, just might take some time to find what you want.- Drag Line
- Post #11
- Forum: KJ General Discussion
-
D
KK Liberty Big Brake Kit
Hi Rotary_Powered, This is a good write up. I want to do the BBK because I tow about 4,500lbs about 2x/month with my '11 KK. Most of the time it's all good but occasionally I need, or would like to have, the additional stopping power. I have seen similar writeups where they changed out the... -
D
Select Trac II
Update on the 3022, Select Trac II transfer case. ATF+4 fluid is the fluid to use, as per Jeep and numerous differential/transfer case rebuilders. The STII does have plated friction clutch packs. It is INFERRED but not stated the ATF+4 fluid acts the same as the friction additive recommended... -
D
Select Trac II
Hi All, I have a 2011 Liberty with the 3022 tag on the transfer case. Jeep states through the VIN Tag search that it is a Select Trac II. This model of STII is supposed to have a Limited Slip Differential that should be locking the front & rear axle together for a 48%:52% torque split... -
D
Disabling the airbag system
Thank you all for the replies. Now I have to digest it all. I’m looking into having ATH build a front bumper if Morgan has time. The relay switch looks promising too. Maybe a bumper & switch? most of my driving is during low light hours so just ignoring the dash light isn’t an option.- Drag Line
- Post #8
- Forum: KK General Discussion
-
D
Disabling the airbag system
Hi Zach, No issues, just want it disabled so it can’t accidentally deploy. It is still on a recall fix anyway & I’m sure it won’t be fixed as they keep putting it off due to no parts, or so they say. Takata is gone & no one is gonna step up. Parts for the KK are getting harder to find & I don’t...- Drag Line
- Post #3
- Forum: KK General Discussion
-
D
Disabling the airbag system
Hi All, I was wondering if anyone would know how to disable the airbag system on an ‘11 KK And keep the airbag light cleared on the dash. AKA tricking the computer into thinking the airbag system is OK & not disabled. I occasionally push with the front bumper and I would really prefer not...- Drag Line
- Thread
- Replies: 8
- Forum: KK General Discussion
-
D
Wheels
Hi all, I would like to share what I have learned about wheels and possibly take some of the mystery out of them for you. Back Space: is a quick way to determine if one wheel is similar to another/different wheel. It it measured from the inside center surface that will mount to/touch the drum...- Drag Line
- Thread
- Replies: 2
- Forum: Tires / Wheels
-
D
Will the 2008 Jeep Liberty wheels fit a 2002 Jeep Liberty?
As long as they are a 5x4.5 bolt pattern & about a 40mm - 44mm offset, they will work- Drag Line
- Post #3
- Forum: Tires / Wheels
-
D
Lift Gate Glass Open Switch
MyMoparParts.com Flipper Window Switch - Mopar (68033262AA) 2009-2012 Jeep Liberty - 68033262aa Sale Price: $20.23- Drag Line
- Post #16
- Forum: KK General Discussion
