Search results

  1. M

    Valve question

    The injector cleaner was a formula the mechanic used. He disconnected the fuel and ran a can through pressurized snap on machine. Was that was the induction cleaning you were referring to? Costed about a $100. I asked him about doing s compression test. He said with how subtle the misfire is...
  2. M

    Valve question

    Thanks for the reply. I change my oil at 2500 miles to, I've always babied it. I did clean the throttle body, but maybe I should do it again. All parts I've used have been mopar. Thanks for the link. I'm not a mechanic but wouldn't the misfire get worse when revving if the valves were bad...
  3. M

    Valve question

    Hi everyone, I'm having a misfire issue that is coming back. Specifically on cylinder 6, 4 and occasionally 2. It's really subtle, and shows up at idle. When a reader is plugged in it clocks misfires only at idle. When the engine is revved the cylinders no longer misfire. The mechanic thinks...
  4. M

    New rock lizard roof rails w/ line-x

    Here are a few pictures if anyone would like more or of specific areas. I also took a picture of the side to show some of where the linex was sanded. Thanks Sent from my iPhone using Tapatalk
  5. M

    New rock lizard roof rails w/ line-x

    Would 175 shipped sound fair? They have locks and I bought them last year. Sent from my iPhone using Tapatalk
  6. M

    New rock lizard roof rails w/ line-x

    I have a new pair of roof rails from rock lizard. I did fit them, meaning I had to sand some corners of the linex to fit. 240 shipped lower 48, I will get some pictures up this weekend. I also have renegade factory roof rails with jeep aero cross bars if anyone is interested in those. Thanks...
  7. M

    Inside Frame rust prevention

    Thanks Tom Sent from my iPhone using Tapatalk
  8. M

    Inside Frame rust prevention

    I'll snap a picture today, I'm not referring to the brake light. On the bottom of the door on my driver's side passenger is getting rust where the sheet metal of the outer door is bent over the inner sheet metal on the door. It looks like that outer sheet metal created a trough and held water...
  9. M

    Inside Frame rust prevention

    I just started my project, I had a couple more questions. I found some bubbling on the rear passenger door where the sheet metal is bent over on the bottom of the door. I've started sanding that and there is some rust in within the bend. Not so bad that the metal is compromised. Does anyone...
  10. M

    Inside Frame rust prevention

    Thanks for the input, I made the plunge and bought the internal frame coating set up to use with a spray gun with a wand. I picked up some wire brushes to put on my drill to try and get in through the drain holes and up into the frame. I won't get it done until temps warm up enough for the paint...
  11. M

    Inside Frame rust prevention

    What do you all use to protect the inside of your frame from rust? I saw the Eastwood internal frame coating, does anyone have experience with it? Or POR15 sprayed through a wand? I was also thinking about applying fluid film through a spray gun with a wand over top of the coating, good idea? I...
  12. M

    05 Liberty Renegade Misfire

    I'm going resurrect my old thread, I had another random misfire. No noticeable loss of power. I did notice that the idle sometimes fluctuates a couple hundred rpm (the tack will just move up one or two notches at idle then drop to normal and repeats) I checked the tps sensor with a voltmeter and...
  13. M

    05 Liberty Renegade Misfire

    Just giving a update. I took it to another mechanic and he's confident it was build up, he ran some fuel system cleaner through it. So far so good, no misfires been about ~ 300 miles now without any problem. Fingers crossed Mk
  14. M

    05 Liberty Renegade Misfire

    Thanks, yeah I'm going to have another mechanic look at it see if they think it's the same thing. For the heads they said it would take 12 hours labor same as if the engine had to be replaced and it would take atleast two days because they use a machine shop for it. I wonder to how many misfires...
  15. M

    05 Liberty Renegade Misfire

    The reason I was looking at that route the dealer was 3800 to repair heads that includes labor Mk
  16. M

    05 Liberty Renegade Misfire

    Amy suggestions where to look? The jeep dealer could get a engine for 4100 and 1300 to install with as they said "few other things will be needed" and they couldn't tell me if it was re manufactured engine or what. From what I gathered all the replacements I'm looking at are going to be reman's...
  17. M

    05 Liberty Renegade Misfire

    The dealer is who looked at it today I'm going to try and see if I can get another mechanic to look at it. They reset the check engine light and I drive it home (40 miles) and the light hasn't come on. Was your light intermittent or would your misfire pop up again? The guy said miss fires on 6...
  18. M

    05 Liberty Renegade Misfire

    Well had to take it in and they think it's bad valves. The guy said they were getting mis fires on multiple cylinders. The injectors, plugs, coil packs, fuel pressure all checked out like I thought they would. If it is bad valves; wouldn't I have had more steady issues or signs it's not running...
  19. M

    05 Liberty Renegade Misfire

    Yeah figured that part I just was asking if they built it or sourced a remanufactured engine from a builder Mk
  20. M

    05 Liberty Renegade Misfire

    Was that a local builder or a online remanufacture? Mk

Random media

kj2
Snow Storm.jpg
Just a shot showing it off.
IMG 0287
20130323 172351
Centralia Run 10 24 10 024
After: Wider stance
After 2.5 Daystar spacer lift, which I am perfectly happy with
After

Latest posts

Members online

Total: 351 (members: 4, guests: 347)
Top