Search results
-
Liberty Thermostat Location/Change ?
It was, ran into a couple of minor issues but that was mostly me not having my mind fully on the task at hand. Nothing serious, just 'D'oh' moments that wouldn't have happened if I had been more focused on the job. But it's done and now I should be good for a few more miles, just have to make...- Corwyyn
- Post #19
- Forum: KJ General Discussion
-
Liberty Thermostat Location/Change ?
Wow, here I go reviving an old thread. :D Just wanted to post up that I changed my hoses and t-stat this week, went to the dealer and got one with the gasket for $18 and change out the door (after tax). I had some issues with overheating earlier in the week and figured it was time to do...- Corwyyn
- Post #17
- Forum: KJ General Discussion
-
Hi from AZ; bought an `07 KJ 4x4 last year.
Was that the one up in Scottsdale? If you need dealer service you might try Airpark, haven't gone there myself but I've heard good things about them. There's also a dealer on McDowell between Scottsdale Rd. and Galvin Pkwy, (Power Chrysler/Jeep I think), I've pruchased some parts from them and...- Corwyyn
- Post #6
- Forum: Introductions
-
Hi from AZ; bought an `07 KJ 4x4 last year.
Welcome from down Maricopa way wavey.gif Which dealer did you purchase from?- Corwyyn
- Post #3
- Forum: Introductions
-
-
So just kind of an amusing story...
Hmmm, must have been an upgrade cuz my '03 Sport runs just fine with a generic key in it. I just wish it had the lock cylinder on the passenger front door, but noooooo they decided that just the one on the driver's door is good enough... :mad:- Corwyyn
- Post #2
- Forum: KJ General Discussion
-
AC works great then shuts off
There is a switch/sensor on the high pressure side and on the low pressure side, could be one of them going out. Might want to have someone knowledgeable check them out. Desertkj had problems with his AC recently, turned out to be the compressor. You can check out the thread he started to...- Corwyyn
- Post #4
- Forum: KJ General Discussion
-
Skid plates discountinued for 02
The skid for the '05+ models can be made to fit, it's just that the mounting holes don't line up perfectly. You can overcome this by either drilling new holes in the skid to match the mounting locations you have, or just drill thru the crossmembers and run bolts all the way thru (but don't...- Corwyyn
- Post #4
- Forum: KJ General Discussion
-
Bought It But Not Really Sure What Got If Worth It.
Yep since he doesn't have those pesky CV angles to worry about :rolleyes:- Corwyyn
- Post #4
- Forum: Lift Kit Discussion
-
Ham in Jeep...
Well I have my dual-band Kenwood mounted on the side of the center console: And the control head is on top of the dash hump; I also have the control head for my Alinco HF radio mounted on the center of the dash above the vents: Here are a couple of pics of my antenna setup. It's a lip...- Corwyyn
- Post #26
- Forum: KJ General Discussion
-
DLR Relay Socket - Works, But...
Do you mean Daytime Running Lights (DRLs)? If so then yeah the BCM would probably need to be reprogrammed since they don't offer that in the States (which is fine by me).- Corwyyn
- Post #2
- Forum: KJ General Discussion
-
Disable the Tire pressure light and chime?
Actually I read a TSB about doing that, seem to recall they had a way to do it so that folks who swap regular tires for snow tires in certain areas wouldn't have to put up with the annoyance for months at a time. I'd do a search right now but I've got to be up in six hours for work so I need to...- Corwyyn
- Post #4
- Forum: KJ General Discussion
-
HOW TO: Relocate Spare Tire
Sorry, maybe 'Louvers' would have been more appropriate. Something like these on Troy's KJ: -
HOW TO: Relocate Spare Tire
I know they used to do that on the old style Rovers and other 4WD vehicles but I just can't see trying to look out my front windshield around my spare, plus it would probably block the grilles I'm planning on putting in the hood in a month or so. Not to mention that the local LEOs would... -
headlights flash off & on
You could exchange the relay with one from another circuit to see if that eleminates the problem. If it is still present try pulling the connectors off the headlights and check the wires going into them - on occassion they will show signs of heat damage. If they do you can either go to the...- Corwyyn
- Post #4
- Forum: KJ General Discussion
-
How to mount Hella's...???
Should be a light green wire with a brown stripe on it.- Corwyyn
- Post #7
- Forum: KJ General Discussion
-
got the lights all.......
Depends on what you're doing - if you want them available whenever any of the lights are on you can run the 'sense' wire (green) to the parking lamps, but since the driving lights are designed to work in tandem with the hi-beams that's normally where you would connect it and you wouldn't even...- Corwyyn
- Post #9
- Forum: KJ General Discussion
-
got the lights all.......
Scott, this diagram might make more sense: It is the standard diagram for the Hellas, I just color-coded it to make it easier to match up to the wiring harness.- Corwyyn
- Post #6
- Forum: KJ General Discussion
-
Dash Squeak by Tweeter
Are you sure they have a bolt head on them and aren't a torx head bolt? Not dogging on you or anything, just wondering. EDIT: OK just went out and checked my mothers' '05 and it does have regular bolts in the handles. I know I've seen a post on here about what you need to remove them, I'll...- Corwyyn
- Post #10
- Forum: KJ General Discussion
-
Heroes' KK
Don't watch the show so wouldn't know. Besides anything down in the regular broadcast channels just rots yer brain, didn't you know that H? :p- Corwyyn
- Post #2
- Forum: KK General Discussion
Members online
No members online now.