Search results
-
power steering
for 2004+ : ATF+4 before: Mopar Power Steering Fluid Cheers :)- AlexKJ
- Post #6
- Forum: KJ General Discussion
-
trans issues...
Blake, I've found that this, this, this and this sites says the same thing: Cheers! :)- AlexKJ
- Post #19
- Forum: KJ General Discussion
-
trans issues...
That's not accurate... I have a '03 with the computer in the right side and I have a 42RLE... This is the "early setup" for the 42RLE, mostly for '03s... That's right! This is the better way to know... 13 bolts for the 42RLE, 15 bolts for the 45RFE... These are pictures of aftermarket...- AlexKJ
- Post #11
- Forum: KJ General Discussion
-
Headlamp rubber boot
I really appreciate that, Ryan... Thank you very much :)- AlexKJ
- Post #6
- Forum: KJ General Discussion
-
Headlamp rubber boot
Yes.. in 3 Chrysler/Jeep authorized dealers (and one unofficial) ... the thing is the part isn't in their databases... Also called 5 auto wreckers... the problem now is that the KJ isn't the most popular vehicle around here and I still haven't found even one KJ totaled... Also looked on...- AlexKJ
- Post #4
- Forum: KJ General Discussion
-
Headlamp rubber boot
Any help out there? :o Pretty please with a cherry on top? :D- AlexKJ
- Post #2
- Forum: KJ General Discussion
-
Headlamp rubber boot
Hi! :D I'm looking for the rubber boot of the headlight of the KJ. It's like the round black thing in the right area of the picture... I've looked at junkyards and part stores, stealership, etc... The original rubber boot has written on top "P/N 5210165"... Also I have the Mopar parts...- AlexKJ
- Thread
- Replies: 5
- Forum: KJ General Discussion
-
Where do you wheel your Libby?
Well... I only have photos of my last vacations... Volcanos, lagoons and rivers ... I wish I has more time for wheeling (and more bucks for modding :D ) Cheers! :)- AlexKJ
- Post #22
- Forum: KJ General Discussion
-
brakes
Here they want US$170 for each rotor and US$150 for each kit of pads (Mopar) If you replace all... you have to spend like US$980 :eek:- AlexKJ
- Post #5
- Forum: KJ General Discussion
-
Part numbers for skids
I have 52128539AC for the front skid plate (assuming a 3.7), but I have 52128925AC for the tranny's...- AlexKJ
- Post #4
- Forum: KJ General Discussion
-
struts and shocks without lift
Which of these ¿Reflex or Sensa-Trac? Sadly, there is no RSX struts/shocks for KJ/Durango around here (only RS)... Monroe is the best I can get...- AlexKJ
- Post #3
- Forum: KJ General Discussion
-
Tools size
Hi :) I want to perform maintenance to the KJ... I need some tools, but I don't want to "over buy" or buy the wrong ones... The things I want to do/change are: - Oil and filter - Air filter - Spark plugs - ATF and filter - Coolant flush and refill For the oil/filter and air I...- AlexKJ
- Thread
- Replies: 2
- Forum: KJ General Discussion
-
MPG thread
Maybe is the way I measure it... In a empty section of the road, in a nice warm day with no wind, low alttitude, with cruise control in 62-63mph, I reset the EVIC and 12 miles later see it again... I know that the readings of the EVIC can be inaccurate, but what can I say... It's 100% highway at...- AlexKJ
- Post #22
- Forum: KJ General Discussion
-
Headlight lamp disassemble
Exactly... by the way, sorry about my poor english :p That's right I rode the same thing... nothing about the interior in the manual... neither here nor L.O.S.T. Thanks anyway :)- AlexKJ
- Post #3
- Forum: KJ General Discussion
-
Headlight lamp disassemble
Hi everybody :) I was installing a couple of Sylvania Silverstar H4 (only for Export models) and I've found that the left lamp boot is missing :( (darn stealership) The result was the lamp get dirt inside... it has dust and a few stains of dried drops... So the question is how...- AlexKJ
- Thread
- Replies: 4
- Forum: KJ General Discussion
-
4.10 Ring and Pinion for Corporate 8.25
Hi guys... I was looking for the Mopar P/N of the 4.10 gear and pinion and I found 2 options: - 04720973AB Axle Ratio - 4.10 with 3/8-24X.840" Ring Gear Bolts - 05140914AB Axle Ratio - 4.10 with M10x1.00x21.00MM Ring Gear Bolts How can I know what P/N I need? Thanks in advance :)- AlexKJ
- Thread
- Replies: 1
- Forum: KJ General Discussion
-
No Heat
I think hardcore off-roaders hate it b/c has shorter travel, easily a wheel lost contact with the ground, lifting is expensive and you get smaller lifts than with a SFA... About disconnects... Maybe you should look at this Cheers- AlexKJ
- Post #28
- Forum: KJ General Discussion
-
anyone else had this problem with noise?
Could be the ABS self-test humming? Good luck :)- AlexKJ
- Post #5
- Forum: KJ General Discussion
-
MPG thread
Sorry for the OT... :D It's difficult to DIY? Is 55037533AG the right MOPAR P/N? Cheers!- AlexKJ
- Post #11
- Forum: KJ General Discussion
-
MPG thread
12-14mpg in a very heavy traffic city 21-24mpg in highway/interstate The better figures in highway are with warm and dry weather, A/C off, all windows up, 2 passengers and light luggage... no roof basket, no lightbar and 36psi in the stock SR-A tires. Cheers :)- AlexKJ
- Post #8
- Forum: KJ General Discussion
