Search results
-
O
GPS antennna
I have a puck one mounted on the far right side near the tweeters. It's a black Garmin puck, that I use for some radio stuff. Never even notice it.- Ohio-white-kj
- Post #2
- Forum: Electronics
-
O
Caliper Brands
Pretty much any from the major parts stores will be similar. Not really much difference possible. I used to rebuild my own myself, but at the price anymore it's not worth it. I replaced all 4 a few years ago - actually replaced everything, rotors, pads, emergency shoes and painted the...- Ohio-white-kj
- Post #9
- Forum: KJ General Discussion
-
O
Dash Speakers - Infinity
I know but really have no desire to do it. I did that years ago on a set of high-end floor speakers - coincidentally, they were Infinity.- Ohio-white-kj
- Post #3
- Forum: KJ General Discussion
-
O
Dash Speakers - Infinity
Anyone have a source for something that fits and works? '05 with the Infinity system, no desire to remove amps, replace the head unit, etc. Just need to replace the Cracker Jacks.- Ohio-white-kj
- Thread
- Replies: 2
- Forum: KJ General Discussion
-
O
2ohm to 4ohm sound
Piggybacking on this thread. What is the current - available replacement for the Infinity dash speakers? I'm am not removing the amps or replacing the stock head unit. I'm so deaf it does not make sense. Just need to replace the crackling stock ones.- Ohio-white-kj
- Post #14
- Forum: KJ General Discussion
-
O
Headliner out
How difficult is it to remove? I like Mudd's idea, plus I have an annoying rattle in the front, probably those "cups". Hey Tom - where can you get small quantities of spray foam - I'm assuming spray and not the gap filler.- Ohio-white-kj
- Post #4
- Forum: KJ General Discussion
-
O
Rear Fog Lights
Mine was used - done by the previous (local 1 owner), fairly low driven miles, but probably 10-20K TOAD. PLUS - no northern salt - Snow Bird owner. Looked like a shop did it and removed the brake setup but left the lights. They ran HD trailer wiring front to back and I removed it, now I...- Ohio-white-kj
- Post #11
- Forum: How To
-
O
Rear Fog Lights
A similar setup is done for TOAD Libbys. Then run wiring to the front for the tow vehicle. That way there is totally independent stop, turn and rear lamps.- Ohio-white-kj
- Post #8
- Forum: How To
-
O
plastic peeling off OEM wheels
I learned the hard way... Started by sandblasting the first one. I figured the aluminum was rough under the clear coat. It was not. So I tried paint stripper on one - worked great and took little time. Paint remover, clean, wipe with prepsol (pre-paint wax grease remover), etch primer...- Ohio-white-kj
- Post #13
- Forum: Tires / Wheels
-
O
Ignition switched power - cargo area
OK - back at this. Tore the panel out. The relay that is supposed to be ign in/out has no power. Diagrams show fuse 30 under the hood - 30 is there and OK, as well as one under the dash that also is for some other items - also OK. Anyone have another suggestion?- Ohio-white-kj
- Post #6
- Forum: KJ General Discussion
-
O
Ignition switched power - cargo area
Yeah --- mine only had the 4 pole flat pigtail installed, but does have the mount for the round one... I'll just pull the panel off, will probably add the other pig tail as well while in there. Going to wire up a rear facing dashcam. Thanks- Ohio-white-kj
- Post #5
- Forum: KJ General Discussion
-
O
Ignition switched power - cargo area
Mines a MOPAR - at least 99% sure as I hear the relays, it also had a MOPAR hitch added (2nd owner) . What is this spring loaded cover? AFAIK you need to remove that right-hand cover panel for access. I'll admit I have not spent much time lookng...yet.- Ohio-white-kj
- Post #3
- Forum: KJ General Discussion
-
O
Ignition switched power - cargo area
Anyone know if/where there is ignition on power source in the rear anywhere? I know I can run from the front - just lazy in case something already there. Have the factory tow hook up as well, and a service manual. 2005 - Libby- Ohio-white-kj
- Thread
- Replies: 5
- Forum: KJ General Discussion
-
O
Unbelievable corrosion on 2008 Jeep Liberty Front Axles
FWIW - I've never seen this much crapola on anything I've ever torn down. And I'm either older than Dirt, or older than Mudd :) Any chance of a photo when it's cleaned up? Is it possible some type of reaction with a lube - but isn't that a dry area? Worst galvanic I ever saw was after...- Ohio-white-kj
- Post #23
- Forum: KK General Discussion
-
O
Durlast wheel sensor made by MOPAR?
Probably true, I can tell you we used to ship to Wells. Quite a bit in fact. When we started selling off some of the real old stuff they bought some of it. I know when we did a new part some was restricted for aftermarket for a set period. Also, aftermarket had no OEM marks. Much of...- Ohio-white-kj
- Post #11
- Forum: KJ General Discussion
-
O
Durlast wheel sensor made by MOPAR?
Worked for Kellogg for a while.although a lot of their stuff was outsourced, they do no or little off brand. I know none of the cereal was. There are a LOT of off /un-brand cereal producers.- Ohio-white-kj
- Post #9
- Forum: KJ General Discussion
-
O
Durlast wheel sensor made by MOPAR?
The truth is MOPAR does not actually make a huge percentage of parts. I worked at an OEM for over 20 years. We made OEM parts for new vehicles, replacement with the OEM name, and replacement with a 3rd party name, or no name and the buyer would re-package it. Been away for over 10 years and...- Ohio-white-kj
- Post #7
- Forum: KJ General Discussion
-
O
Led upgrade hazard flasher mod
Can you tell what ones you used for the brake lights? I picked up some a year ago at Autozone and all I could do was blow fuses. Finally gave up. Did the rear turn signals years ago - just some generic resistors behind the lamps.- Ohio-white-kj
- Post #23
- Forum: KJ General Discussion
-
O
Yokohama G056. Decent tire?
I have some model of Geolanders , think THIS: Geolandar A/T G015 or older/similar. Some of the best tires I have owned in 40+ years.- Ohio-white-kj
- Post #2
- Forum: KJ General Discussion
Members online
No members online now.