Search results

  1. K

    Stock UCA maxed out

    I have JBA lifted UCAs and they contact spring at full droop
  2. K

    Lessons learned with lift

    Just to throw in my .02 When I did my lift, Im pretty sure it was the passenger side, I was hitting and hitting and hitting the spindle and the damn thing would not pop out. I had a 3lbs sledge. Out of desperation I took 2 half effort swings at the stud and it popped right out.
  3. K

    Finally lifted. P or LT tires now?

    Duratracs can be orderded in load C in 245/75/16
  4. K

    Bump start?

    And yes they are heavy to push lol
  5. K

    Bump start?

    Battery. Left my dash cam plugged in. Life is really piling it on right now. I have heard of MT cars that you're not allowed to push start that's why I wanted to check. Got a jump anywyas thanks guys.
  6. K

    Bump start?

    Is it OK to bump start these things? With manual transmission of course
  7. K

    Need help installing 4xguard rocker covers

    The two bolts towards the front on the pinch weld ARE two of the mounting holes? Thats helps at least there is SOMETHING already on the body to help me line it up.
  8. K

    Need help installing 4xguard rocker covers

    Ok thank you. Do you have any pics with the doors open?
  9. K

    Need help installing 4xguard rocker covers

    So how the heck do you align the holes so the thing is in the right spot?? Man Im moving in 3 weeks and I have so much stuff to do. I wanted to throw these on quickly and be done with it. Now going to have to wait until after I move....... In your test fit pic, what is holding the front of the...
  10. K

    Need help installing 4xguard rocker covers

    So going to install my 4xguard rocker covers. It says test fit the bolts through the pinch welds of the rocker panel and that there should be 6. i cant see any holes on either side. on both sides there are 2 bolts towards the front. do i need to remove those ones? that still only leaves 2...
  11. K

    Hubcentric spacers center bore/hub diameter

    Yar. Wheels are stud centric. As long as the hub fits through the hole in the middle you are fine. Any half decent wheel spacer will be hub centric so specific hub size is nessecary spec. Based solely on my own observation however I'm pretty confident this is accurate It's just how the part...
  12. K

    Code says turbo overboost??

    Start by checking all vacuum lines. A leaky waste gate line will over boost.
  13. K

    Really need help

    Yes that is what I meant when I said I reset pre-load. I didnt do it for the new springs but I will try it when I get a chance. So the Y-link being shot can make the front sit uneven? This is very interesting. There was a .25" difference in height with stock springs. I didnt think anything of...
  14. K

    Which Year Liberty Should I Buy?

    05 is my vote. only year you can get a 6 speed manual and a LSD from the factory
  15. K

    Warped rotors

    That's what I said in my first post. I was just suggesting maybe a proper break in wasn't done but then OP said he did one so the point is moot
  16. K

    Tailgate conversion

    I just bought a utility trailer for the same reason now I want to go haul stuff around just because I can.
  17. K

    So remember some people had bj flipped on jba a-arm?

    Ok good. I was wondering for a second if that was the correct way and that's why my jeep is still sitting lower than it should lol
  18. K

    So remember some people had bj flipped on jba a-arm?

    Is the first pic the wrong way or the right way?
  19. K

    new guy here

    Welcome
  20. K

    Tailgate conversion

    I've never seen it. And somehow I don't think it would be easy. But you would definitely be unique!

Random media

2786.jpg
image
image
That be my Jeep
At Avon NC
363.jpg
7
Getting spoted to get over the hughe bolder you can't really see cause of the bushes.
Jeep Pcv free Filler Neck

Latest posts

Members online

Total: 349 (members: 2, guests: 347)
Top