Search results
-
2
4.10 Re-gearing - 2025
Omg yes I followed your winter gear swap. That had to have been brutal. Maybe in my younger years…lol By the way Rene_05 that is a darn good looking jeep. I hope mine turns out half as nice!!!- 2TALL1
- Post #33
- Forum: KJ General Discussion
-
2
4.10 Re-gearing - 2025
20 years ago I used to build square body Chevy pickups. Frame off builds with custom lifts I had 2 places I took my axles to have built and they both had custom vices to hold the axles.( oh both places didn’t make it through fuqing covid scam) Mine is a 6 speed so my carriers won’t work with the...- 2TALL1
- Post #31
- Forum: KJ General Discussion
-
2
4.10 Re-gearing - 2025
Here’s another idea for you. Get ahold of Yukon and see if they have a list of qualified installers in your area…- 2TALL1
- Post #28
- Forum: KJ General Discussion
-
2
4.10 Re-gearing - 2025
Exactly on the IFS a lot of the places I talked to especially the ones with high quotes act like they were like the clam shell style. Even after I reassured them it was like a normal Dana 30. The fact they didn’t know also steered me away from them. One guy quoted me $2,100 and when I told him I...- 2TALL1
- Post #24
- Forum: KJ General Discussion
-
2
4.10 Re-gearing - 2025
That is so crazy I’ve spent so many hours searching and calling using every part number from Yukon to Dana even Dorman and everything in between. I think that is a good price. The last of the Yukons were going for around $700 Which is insane because they are all Dana gears. Sure wish Tommudd was...- 2TALL1
- Post #18
- Forum: KJ General Discussion
-
2
4.10 Re-gearing - 2025
I’m in eastern Oregon and about to take the same adventure. It’s actually astonishing to me how few people do gears anymore. The quotes I have found have been all over the board. Anywhere from $2,000 an axle to $500 an axle. And some of them are hours away from where I live. I have an extra set...- 2TALL1
- Post #13
- Forum: KJ General Discussion
-
2
Lift pics and spec thread
Looks great that’s how they should have looked from the factory!!! Were you able to use both washers on your Deeke’s? I’ve seen where some use both or just one or none.- 2TALL1
- Post #205
- Forum: Lift Kit Discussion
-
2
New Jop, what should I do to it next?
I would jump on that if I was you. With that new front coils, bumpstops and hockey pucks you would have a great lift for around $500 Also EBay for the tow hooks- 2TALL1
- Post #6
- Forum: KJ General Discussion
-
2
Lift is done!!
I have spoken with Yukon and they get there D30a 4:10 gears straight from Dana Spicer and even though it shows a back order the date is 2 years out. I’ve tried soooooo many different ways to get a set of gears and it all comes back to Dana has discontinued them… Yet another thing I...- 2TALL1
- Post #7
- Forum: Lift Kit Discussion
-
2
Lift is done!!
Oh bummer man sorry to hear about that. Some people really suck!!! From all the phone calls and research it looks as though no one produces 4:10 gears for the liberty’s front axle anymore….. And finding a 4cylinder donor is almost impossible at least from all the looking I’ve done.- 2TALL1
- Post #4
- Forum: Lift Kit Discussion
-
2
Lift is done!!
Looks great!!!! Where did you source your 4:10 gears at?- 2TALL1
- Post #2
- Forum: Lift Kit Discussion
-
2
CB Engineering Lift kit.
Sorry I got a new set of 790’s not 780’s- 2TALL1
- Post #4
- Forum: KJ General Discussion
-
2
CB Engineering Lift kit.
I’ve looked into it and talked to the guy. Seems legit. He got back to me pretty quickly. He was very knowledgeable on spring rate and such. His price isn’t to crazy. I was going to go this direction then got a smoking deal on a brand new set of 780’s. I still might go this direction down the road.- 2TALL1
- Post #3
- Forum: KJ General Discussion
-
2
ARB Bumper Discontinued
All gone!!! Hopefully someone on here got the last of them.- 2TALL1
- Post #16
- Forum: KJ General Discussion
-
2
790's and ARB Bumper
Howdy all So after hours of searching I can't find the answer to this question I have purchased a set of 790's to go with my new ARB bumper and winch. I'm trying to see if I still need top plate and conduit nuts to reach 3" lift. This might just have to be an install see where it sits and go...- 2TALL1
- Thread
- Replies: 0
- Forum: Lift Kit Discussion
-
2
ARB Bumper Discontinued
I just checked on there web site and they don’t show any 01-04 model bumpers But they still show the 05-07- 2TALL1
- Post #14
- Forum: KJ General Discussion
-
2
ARB Bumper Discontinued
There was three Now I imagine there is only 2 $99 shipped in the us Total was $1,503 That is for the 05-07 models Didn’t inquire about the 01-04 models I was thinking about buying the rest and sitting on them Might be a good investment- 2TALL1
- Post #13
- Forum: KJ General Discussion
-
2
ARB Bumper Discontinued
I’ve been wanting one for 10+ years I procrastinated and thought I had lost out. I actually started looking for used ones. Talking with fab shops about building one on a whim I thought I’d call them to see if there was any way they had one left. This is the last aftermarket bumper available for...- 2TALL1
- Post #10
- Forum: KJ General Discussion
-
2
ARB Bumper Discontinued
So I just ordered my ARB bumper for my 2006 and they only had 3 left. And they were on sale!!! $1503.00 shipped Don’t mess around with other stores just go to ARB USA and purchase your bumper and OME springs. They all just drop ship from there anyway!!! Cut out the middle man!!!- 2TALL1
- Post #2
- Forum: KJ General Discussion
-
2
Rebuilding JBA Adjust a Struts - part numbers
Looks like another attempt at finding the ever elusive 4" rear spring part number. LOL If someone has a set I'd just like the specs off them so I could find something close.- 2TALL1
- Post #9
- Forum: Lift Kit Discussion
