Search results
-
RPMs intermittently stuck when lightly applying gas, slow response over 50 mph
Hope that works for you. Gyro- Gyro
- Post #13
- Forum: KJ General Discussion
-
RPMs intermittently stuck when lightly applying gas, slow response over 50 mph
The tps is part of the gas peddle assembly on 2007-2012.Fly by wire. I posted a link in my previous post. Gyro- Gyro
- Post #10
- Forum: KJ General Discussion
-
RPMs intermittently stuck when lightly applying gas, slow response over 50 mph
As suggested get the codes checked. The 07 KJ has Fly By Wire throttle, like the KK. https://www.napaonline.com/en/p/CRB280197 Gyro- Gyro
- Post #4
- Forum: KJ General Discussion
-
What did you do to your jeep today?
Rolled over 110,000kms (68,350miles) today. 59,000 kms when I got it in 2012. If I can keep a body under it, this could be the last auto I ever own. Gyro- Gyro
- Post #25,988
- Forum: KJ General Discussion
-
Shifter cable replacement troubles…
Go here : http://www.colorado4wheel.com/manuals/Jeep/KJ/2005JeepKJServiceManual.pdf In the trans and tc section 42rle, gear shift cable section, you will find the help you need. Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
liberty models
The 2005, 2006 Renegade and 2005 Rocky Mountain Edition Liberties received an exclusive flat hood and taller grille. Gyro- Gyro
- Post #2
- Forum: Introductions
-
Need Part Identification
The gasket I linked is for 07 and later with throttle by wire, 06 and earlier with throttle by cable is a different gasket, along with different TB and intake manifold. Gyro- Gyro
- Post #6
- Forum: KJ General Discussion
-
Need Part Identification
This the part you need. https://store.mopar.com/oem-parts/mopar-throttle-body-gasket-4666113aa Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
Front Washer Nozzles Conundrum
Are the hoses connected to the right outputs on the pump,which are colour coded. black feeds rear and blue feeds front. Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
outer tie rod to steering knuckle nut torque?
Yes 80ft lbs to knuckle. 55ft lbs on the jam nut. Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
Clacking in front end
Just noticed in your sig you have an 2008 kk. The link in my first post is for the kj. Here is a link to cv for 08-12 kk .https://www.driveshaftparts.com/CVJ015 Gyro- Gyro
- Post #6
- Forum: KJ General Discussion
-
Clacking in front end
Check the boot on tc side of front driveshaft. If the boot is shot, the cv is likely too. Cheap and easy fix - https://www.driveshaftparts.com/ME807 Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
Where to get OME springs, shocks, struts for cheaper
They do seem to be scarce. Gyro- Gyro
- Post #8
- Forum: Lift Kit Discussion
-
Where to get OME springs, shocks, struts for cheaper
Also OME N132L(L= long) shocks for the rear is what most use. What country are you from? Gyro- Gyro
- Post #3
- Forum: Lift Kit Discussion
-
Hi from SK
Yes, welcome. Where are you from? South Korea or Saskatchewan? :) Gyro- Gyro
- Post #3
- Forum: Introductions
-
Newbie question about lift kits
And if you do regear,you need to do front and rear. Gyro- Gyro
- Post #3
- Forum: Lift Kit Discussion
-
Spotlight install
Through the main wiring harness gromet below the brake booster. I taped the wire to a knitting needle to feed it through. Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
Air hoses - what are they or part numbers
They are part of the Positive Crankcase Ventilation system. Gyro- Gyro
- Post #2
- Forum: KJ General Discussion
-
possible traction control issue
I had similar problem on my 06, it was a wheel sensor. Gyro- Gyro
- Post #3
- Forum: KJ General Discussion
-
Is a Willys decal wrong
And the Willys played a large part in preserving our Liberty . Gyro- Gyro
- Post #7
- Forum: KJ General Discussion
