Search results

  1. KJowner

    Stripped belt tensioner bolt ?

    CRD? The pulleys are left hand thread so rotate in the opposite direction to undo them.
  2. KJowner

    04 Liberty inner rocker replacement?

    I feel your pain, all my car repairs and welding are done laying on my back on my drive.
  3. KJowner

    04 Liberty inner rocker replacement?

    The dimensions are on the post with the picture. I really wouldn't recommend glassfiber, they are an important part of the strength of the car, the Jeep doesn't have a chassis like the older ones, the passenger cage is all vital, especially if you have a crash.
  4. KJowner

    04 Liberty inner rocker replacement?

    This is what it should look like, the 3 bits of steel make a very ridged section My folded section is 30mm x 70mm x 30mm When you do the outer section make sure you allow for the step in at the rear to let the plastic arch trim sit in so it lines up with the rest of the trim.
  5. KJowner

    04 Liberty inner rocker replacement?

    Yes that's the inner sill, it's much heavier steel than the outer rocker panel & is structural. You will find the remains of a flat strip of steel that complete the box section of the inner sill and separates it from the rocker panel. I used 2mm steel to remake it, it looks like the original...
  6. KJowner

    Jeek KJ 2.8 CRD Limited - Advice Needed

    Hi Olivier, The later ecu monitors airflow so it can see if the EGR isn't working. The only affect of this is putting the light on, the engine performance shouldn't be affected. However if the car has to pass an inspection this might be a problem, there was a kit to fool the sensor with a few...
  7. KJowner

    CRD manual swap

    Mechanically you can get the bits, you would probably need the bell housing, clutch, hydraulics and flywheel. I don't know if you would need to do something with the TCM?? Maybe just put a link in to make it think it was always in neutral.
  8. KJowner

    Clutch :-(

    Just took my wife's Renagade out to fill it up with diesel, 4th gear foot down and the rev counter shoots up but the speed doesn't change, looks like I'll be doing a clutch shortly.
  9. KJowner

    CRD manual swap

    The CRD was available as a manual from new, the 2.5 used the NV3550 & the later 2.8 had the NSG. More common in Europe than in the US though.
  10. KJowner

    EGR CEL solution

    The other option is to contact a guy called Yeti on Facebook, he does online car tuning, and was very active with CRD's on Lost Jeeps forum.
  11. KJowner

    42RLE Shift Solenoid Recurring Failures/P0846 Questions

    I'd check continuity end to end after looking closely at the connections. Also search on here, there will have been other people with similar issues over the years.
  12. KJowner

    EGR CEL solution

    Id guess it was similar to the Mercedes EGR bypass circuit. http://www.peachparts.com/shopforum/diesel-discussion/168261-got-time-egr-bypass-606-turbo-7.html
  13. KJowner

    42RLE Shift Solenoid Recurring Failures/P0846 Questions

    I'd make very sure the wiring was intact before putting the effort and money into a solenoid pack.
  14. KJowner

    Recharged AC today but temp won't drop below 80°

    You can't just put gas in a system that's been open to atmosphere, ideally you need to replace the dryer because it will be full of water then vacuum the system down, check for leaks and regas and oil. Don't run it as it is you will do expensive damage to the system circulating water. The topup...
  15. KJowner

    ABS diagnostics with Appcar for U0121

    That's a nightmare, i only have manuals for the older Jeeps.
  16. KJowner

    What's gone wrong..

    It's called an Avenger, horrible little non Jeep Jeep!
  17. KJowner

    Free air intake channel and filter box.

    Is the CRD airbox different?
  18. KJowner

    What's gone wrong..

    No words....
  19. KJowner

    Rancho wrong shocks?

    I drenched my struts in lanolin rust prevention spray when I assembled them, doesn't attach rubber or plastic & sets into a hard waxy coating. Seems to be holding up well.
  20. KJowner

    ABS diagnostics with Appcar for U0121

    if the module is ok its got to be wiring or a connection at fault.

Latest posts

Members online

No members online now.
Top