Computer to to check the pressure? How about a real fuel pressure gauge...
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Cylinder compression test revealed 25-30 psi in cyl 6, that is bad news. What were the readings on the other 5?
Could be really worn or damaged ring in 6, by the sounds of it. Rebuild or New 3.7..eek.
Not sure. I talked to him again last night, and I mentioned a regulator when he said its getting too much fuel, and he said he was going to put it on the computer to check the pressure next. Hopefully will get it back today.
Car misfires and Mech wants to change the engine? That's worse than a stealership!
Not really, when it's the Jeep 3.7 engine. I've been battling with cylinder head issues for 2 years now (I've written a separate thread about them) and if I'd known what's ahead when the P0306 error first appeared I'd changed the engine right then. Now it's too late. My engine has been open in the shop for 2 months now since I've still no idea what causes the burnt intake valves. After reading this thread I really need to check the fuel pressure next.