Stopping

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MoladoGuy

Full Access Member
Joined
Oct 2, 2004
Messages
3,881
Reaction score
9
Location
DeTrOiT (Actually Warren)
I'm assuming my brakes are going (I have 55K on them). However, I just upgraded my tires from 245/70/16 to 265/70/16 and I find it is harder to stop. This just started when I put the new tires on.

A.) is it because I have a bigger tire, and no need to upgrade the brakes?

B.) yes my brakes should be upgraded?

Thanks for any info!
 

fouros

Full Access Member
Joined
Oct 25, 2004
Messages
1,026
Reaction score
3
Location
Gold Coast Australia
probably a bit of both

the larger tyres create more inertia which makes it harder to stop, after 55,000 miles you will be needing new pads making it harder to stop

=D>
 

Eddo

Full Access Member
Joined
Jan 29, 2005
Messages
501
Reaction score
0
Location
USA
Old brakes really don't make it harder to stop. The slight increase in stopping power is a result from a larger diameter wheel and more rotational ineria from it being heavier. At 55K it is probably time for new brakes anyways.
 

LibertyCRD

Full Access Member
Joined
Aug 19, 2005
Messages
138
Reaction score
0
Location
Kentucky, USA
Yeah like they said. Anytime you get taller tires you are putting more leverage on your brake system. It's the same principle as if you use a 6" ratchet and you can't get a nut loose...you go grab a 10" ratchet and it comes free. With the longer ratchet you get more leverage, therefore more power. With taller tires, the tread is farther away from the center of the hub...therefore there is more leverage working against your brake rotors. That's why it takes longer to stop. If you go too big you can actually create a situation where it's dangerous to drive the vehicle without upgrading the brakes.
 
Top