Tech-Mechanic
Latest activity Postings About
-
-
Tech-Mechanic reacted to Duster's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with
Like.
Lol, cracked me up the way you put it. Loose nut behind the wrench. Do not feel bad. For sure not the first person to have done that... -
Tech-Mechanic posted the thread Anyone know what size bolt holds the oil cooler in place? in KJ General Discussion.'07 KJ w/ 3.7L. My oil cooler bolts are missing. The previous owner had the bracket jammed behind the one for the condenser to keep it...
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..So, yesterday, we finally had a day here over 10°, and I got this dam thing figured out. It had a loose nut behind the wrench... I put...
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..I did replace the lower hose. The new one also did not contain the spring... I still have the old hose. I'll try putting the spring back...
-
Tech-Mechanic reacted to Wesley's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
I had a similar problem with my Jeep. After many tries I found out that one of the radiator hoses was collapsing at highway speeds...
-
Tech-Mechanic reacted to Duster's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
Oh, you got an 07. Air entrapment is a big issue. I have been there and it was bad. Do you have heat? I assume some yes since the time...
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..Mine is an '07. I think it sounds like a capacity issue too But, I'm still leaning toward low coolant due to having air in the system...
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..I made sure to take lots of pictures as I was taking things apart. So I did get the thermo' installed in the right direction. I put the...
-
Tech-Mechanic reacted to LibertyTC's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
Get the Mopar thermostat in hand first (not expensive) & then do the Hoat coolant together. (also a good time to consider Mopar hoses ?)...
-
Tech-Mechanic reacted to LibertyTC's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
Did not realize you were online, refresh as I may have just edited in extra comments. THX
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..Thanks for that advice. I didn't use a Mopar thermo. I used Gates, which have served me well in the past, although I don't see anything...
-
Tech-Mechanic reacted to LibertyTC's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
Ya the Jeep definitely needs Hoat or Zerex G-05 only. Did you use a Mopar 195 degree thermostat? Once cold overnight, see if the coolant...
-
Tech-Mechanic replied to the thread Just got the KJ back from the shop. Still Getting hot at highway speeds..Well, let's hope that's the case... I took it out and drove it again. Still no issues at lower speeds. I took it out on the highway...
-
Tech-Mechanic reacted to tommudd's post in the thread Just got the KJ back from the shop. Still Getting hot at highway speeds. with Like.
Sounds like air in there yet Sometimes it takes a long while with a lot of hat throwing , saying words your mother would wash your mouth...
-
Tech-Mechanic reacted to JeepJeepster's post in the thread No heat Still 2003 liberty 3.7L with Like.
If you get some heat when revving, that tells me you have a flow problem. Are you 100% sure the antifreeze isnt low?
-
-
Loading…
-
Loading…
