Recent content by PDEVVOLTAR

  1. P

    Brake Issue

    Thanks. I will check the cylinder
  2. P

    Brake Issue

    2006. Had it looked at for alignment, different issue. Mechanic said it needs right front hub. It could be the cause.
  3. P

    Brake Issue

    Thanks for the suggestion. That's what I was thinking.
  4. P

    Brake Issue

    Brakes work fine going forward. Go in reverse, brakes are soft. Once I put it in drive, I have to pump the brakes a couple of times. The first "pump" is pedal is on the floor, the second pump and the brakes are still soft, about half way to floor. After that, the brakes feel normal. Any...
  5. P

    Coolant problem

    Got new radiator cap, that seemed to be the issue. Replaced it last week.
  6. P

    Number 4 cylinder misfire

    Number 4 cylinder misfire/coil bad. Had code P2311. Replaced coil and checked plug. Still throwing 2311 code. Swapped plug and coil with number 2 cylinder. Still throwing code for number 4 cylinder. Any ideas?. It is currently in limp mode, will go to 2300 RPM.
  7. P

    Coolant problem

    Replaced reservoir about 6 months ago. Coolant not going to main reservoir, left side of tank or supply side, it is flowing from radiator. The return side is filling with coolant. Found leak in radiator, replaced it today. Any ideas or solutions? Thanks in advance.
  8. P

    '06 WONT START

    Had it scanned again, didn't show any new codes. Tested 3 of the cylinders compression, all were low (60, 90, and 120). Thinking about a rebuild.
  9. P

    '06 WONT START

    Had it pro scanned. Had codes for can & crank shaft sensors yesterday. Both sensors are OEM. No other codes showing
  10. P

    '06 WONT START

    Was driving home, lost engine power and died. Replaced camshaft and crankshaft sensors, relearned both sensors. Getting fuel and spark. Acts like it wants to start but wont fire up. Showing a P0700 code. Any ideas?
  11. P

    06 Intermittent starting

    Replacing the ignition switch is my next step. Thanks for the thread.
  12. P

    06 Intermittent starting

    It starts fine morning, going to work. When I go to lunch, after sitting for 4-5 hours in the sun (temp is around 90), it won't start. Had to "tap" the steering column, near the ignition switch to get it started. Started fine this morning.
  13. P

    06 Intermittent starting

    I have an 06, it won't start in the heat of the day. Morning and night, it starts. Replaced head gasket in May, it started having this issue after the head gasket. Replaced starter this week. Any ideas?
  14. P

    What did you do to your jeep today?

    Not today, but completed Head Gasket replacement over the last 2 weeks.
  15. P

    2006 Head Gasket?

    In Florence, plan in working on it in Sumter.
See more

Random media

KJ gearing
1988 toyota I built the flat bed and the winch mount redid all the suspension and custom built the snorkel it was by far on of my favorite 4x4s I've e
DSC 0386bis
Before lift
One foggy headlight.
2008 jeep liberty
04, jeep liberty limited edition 3.7
IMG 0610
image

Latest posts

Staff online

Members online

Total: 420 (members: 1, guests: 419)
Top