Ksat's latest activity
-
KKsat replied to the thread Engine runs rough after an hours worth of driving.PCM is attempting to add fuel to a perceived lean condition, based on O2 feedback. If you were getting fuel in through the purge...
-
KKsat replied to the thread Misfire woes.Thanks for the suggestion. I ended up going with one on eBay, just a little while ago. Only around $70, which includes programming-...
-
KKsat replied to the thread Misfire woes.Thanks for the detailed reply, dtennes. Yes, I'm still throwing a misfire code, which is expected since the cylinder is still misfiring...
-
KKsat replied to the thread 2004 No Crank/No Start possible security/neutral safety. Please help..Glad you got it sorted and thanks for updating us.
-
KKsat replied to the thread Misfire woes.You were right on the money, reload40s. Bad PCM. Specifically, a bad coil driver, I imagine. I scoped the ignition primary on 4 and got...
-
KKsat replied to the thread Crankshaft position sensor.You ought to test the sensor before just condemning it. Just because you have a code for it doesn't mean it's faulty
-
KHome made noid looks like this. Handy because you can simply plug the electrodes into the FI injector connector housing and tape the...
-
KKsat replied to the thread Misfire woes.Firstly, thank you all for the replies. To answer some questions, To clarify, I could feel the engine missing a minute or 2 after start...
-
KTo clarify, did you physically swap your COPs or just rearrange them while they were still attached to their wires? The true test is to...
-
KIt’s possible something smoked on the PCM board. I’ve seen a post around here that mentioned finding something similar.
-
KI posted a detailed explanation of how to build/install (a) Fuel Injector and (b) Ignition Coil wiring harnesses from scratch. If you...
-
K'06 Liberty 3,7. Misfire on cyl 4. Scoped for secondary waveform on its COP and got no signal (tested adjacent COPs and got a good...
-
KKsat replied to the thread Can't adjust my side view mirrors all of a sudden.Weird. I have an '06, too, and had the same thing happen where at first it worked intermittently then later quit altogether.
-
KFollow up- finally I just ordered a set of plastic covers with integrated gaskets and it’s done. Online for $80. The factory style...
