KJowner's latest activity
-
Doesn't mean much, but I've never heard of that happening on a KJ. Gotta wonder if it was damaged at the junk yard. On good ol steel... -
How did the diff-pumpkin support brackets fail in order for the pinion to rotate upward? Were they missing?
-
There's a small bracket that bolts to the left side of the diff. If it was missing I could see how your situation could happen. With all...
-
KJowner replied to the thread Jeek KJ 2.8 CRD Limited - Advice Needed.Hello and welcome. I don't know much about the TPMS system, mine hasn't got it. The noise could be a wheelbearing, see if its louder on...
-
-
Put on some used OEM front tow hooks and replaced my t case shifter bushing with one from a Ford 6spd auto from work :)
-
KJowner replied to the thread best 2.8 CRD mods???.Yeah, I have 2 as well, 2.5 manual and a 2.8 auto, the 2.5 is slowly giving up parts for the other one, hopefully I'll finish stripping...
-
I have two, one of which has become a donor, and I am getting ready to do my 2nd timing belt and probably an EGR delete. I looked and...
-
KJowner replied to the thread Auto Transmission Dipstick Tube.Scrapyard or Ebay is probably the easiest way, lots of jeeps being broken now, just note that the V6 and CRD have different gearboxes so...
-
KJowner replied to the thread Front differential help.Weird! Are all the bolts and brackets that hold the diff in place all there? Something must have broken to let the diff move like that...
-
KJowner replied to the thread Front differential help.Has the tube mount failed? It should be clamped to the subframe by 2 lugs.
-
-
-
KJowner replied to the thread lifting back to stock height..They are an odd size spring, small and close wound with a high rate, I don't know of any other spring that fit except uprated ones built...
-
KJowner replied to the thread Front differential help.Are you sure both diffs are 4.10? A mix of ratios will do nasty things. When you say axle tube do you mean the shaft or the actual...
-
Hey KJowner, thanks for all that detail – just seeing it now. A few days after my post above, I thought the better of it all, and went...
-
KJowner replied to the thread Air flow does not go out in front position.You may have knocked a hose off the back of the controller but if you look on here you will find lots of information on broken...
