KJowner's latest activity
-
KJowner replied to the thread Knocking Noise and Metal in Oil.Probably a dropped valve seat, would explain the heavy breathing accompanying the misfire, the valve will be stuck open. A second hand... -
It’s got a 4” JBA adjust a strut lift kit from back in the day. The actual height is probably nearer to 3.5” by now.
-
To anyone who may find this thread down the road, "Module Master" at modulemaster dot com will do it. I don't know if that is who op...
-
KJowner replied to the thread Knocking Noise and Metal in Oil.Sounds like a misfire, along with the tapping, noise is very top end so I wouldn't condem it just yet, definitely time to pull the heads...
-
My guess would also be bad new lower control arms or maybe the mounting bracket holes are egged out
-
Are your Trac-Lok's stuck? Another possibility is that one of the brakes is stuck on.
-
Any bolt holes egged out?
-
KJowner replied to the thread Charging issue.Yes, the alternator field is controlled by the ECU, you should only fit the correct alternator for the Jeep. If you have bought the...
-
KJowner replied to the thread Broken sway bar link bolt.How much have you lifted it?
-
Today the sway bar assembly came together! I am still waiting for a new Mopar sway bar to be delivered, so I installed the rusty one...
-
KJowner replied to the thread lifting back to stock height..It would be much nicer to drive if you lifted it level instead of like a powerboat.
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.Really strange, I think your right about setting up the camera to see what's happening, only other thing that comes to mind is faulty...
-
Checked front end. Everything looks good visually. No play. No shake or shimmy in steering. Jeep is solid, no rust or I would think...
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.Check the front lower ball joint and track rod ends, there isn't much else at the back to look at!
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.That's strange, you have done the usual causes of rear end steering. Was there no improvement at all with replacement lower arms? Try...
Latest posts
-
-
Can I get an alignment before rear control arm replacement?- Latest: GitEmSteveDave
-
-
