KJowner's latest activity
-
KJowner replied to the thread New to jeep..Try unplugging the tailgate handle, there is a microswitch in there that unlatches the glass, it is known to fail and make the glass pop... -
KJowner replied to the thread Hello from Italy.Welcome, the 2.8 is a good engine, tough and simple
-
Hi, I'm from Italy, Rieti, I'm just getting to know with my father-in-law's 2.8 CRD. So I'm a real beginner: be understanding with me...
-
My 2002 KJ Limited (3.7) is lifted 2". I needed two new tires, and ordered 235/70/16 KO2's to match the two good ones. The next day, the...
-
KJowner replied to the thread 235/70/16 Front + 265/75/16 Rear?.They aren't massively different in size & in 4x2 it shouldn't make any difference but I wouldn't use 4x4 until you have a matched set...
-
-
KJowner replied to the thread New to jeep..Traction control light is probably an ABS sensor or wiring fault, a good code reader will narrow it down.
-
Take a look at the hinges… IIRC they are adjustable for that purpose. One side may have slipped putting it out of alignment.
-
Sometimes the latch doesn't release when manually opened. There's a little electric switch behind the handle that releases the glass...
-
KJowner replied to the thread Broken sway bar link bolt.All that joy from one bolt LOL I'm a fanatical copperslip user, I only ever struggle once!
-
Well done! Much more patience that I have these days!
-
Reporting in… I broke it again!!! Here are the two nuts I was using as jam nuts. Well that didn’t work. Well it worked a little. I...
-
Check the oil sending unit, it is located right above the oil filter. You can also check the oil fill/PCV assy. A long shot is a...
-
KJowner reacted to roger d's post in the thread 2002 Jeep Liberty coolant bleeding nut rusted shut with
Like.
I bled mine a couple days ago. The coolant bleeder screw, OEM Part Numbr 6034331, was put on too tight. The torque is very low; 4 lbs... -
Mine dropped a valve seat at 125K but no piston damage, a common failure. I bought fully remanufactured heads from...
-
Strongly agree with KJowner there... there are two types of hitches as well, take note if you have 4 bolt or 6 bolts to the frame. if...
