Recent content by jnuncio3

When my CRD did this, I removed my glow plugs and had a stream of HOAT shoot out of my #2 cylinder. I had a cracked head. If you have a gasser, remove your sparkplug and see if it'll spin over. Hopefully its just the starter and not a hydraulic lock. Good luck.

Hello Ken, If she's headed to diesel school, look for a 2006 CRD Libby with the 2.8l diesel engine. 05 had a 2.5l and 06 had a 2.8l. A little harder to find and most folks that have one try to hang on to them. Lots of mods available for the CRD engine.

Hello welro, Welcome to the family. Looks like my libby will have a twin up north. I installed the arb bumper and a warn m8000 a couple of years ago. I installed the Monroe strut assemblies from RA for diesels along with new ball joints and upper and lower control arms. Aligned the front end and...

Apparently my CRD was not going into MAX cooling and was still pulling in ambient hot air. I cycled the mode selector from stop to stop several times and placed a high flow fan in front of the grill to reduce the heat loading. Temp coming from the center outlet dropped to 46F and Low pressure...

I have a 2006 CRD 2.8L. I noticed that my A/C was not cooling very well. I placed a thermometer in the center left outlet and my temp was 75F. Ambient temp was 90F. I figured that I just needed to add some 134a so I hooked up my quick recharge hose with gauge. It almost went into the RED zone...