Recent content by goatman

found the manual here for a 2002 http://www.colorado4wheel.com/manuals/Jeep/KJ/2002JeepKJServiceManual.pdf edit in the power distribution block, fuse #24 feeds the PCM but its labelled as Fuel Pump 20 amp and it had no fuse in it, stole the ac 20 amp fuse and now the obd2 scan tool reads the...

yes , im looking for the diagrams. pin 22 on black connector should have power going to it saw this guy on youtube doing some work on a 4 plug pcm and looks like he just ran 12v to pin 22 and a ground to pin 32/31? kind of deal was out looking at a 2008 today, that stalls at idle, that sat all...

found these guys, its the weekend so ill try on Monday to see if they can send it with the Skim delete or i just delete the skim from the steering column so no one can plug it in https://www.fs1inc.com/oem-engine-computer-programmed-plug-play-2002-jeep-liberty-56041606ah-3-7l.html

grey connector https://ww2-secure.justanswer.com/uploads/EB/ebrock63/2014-12-20_025115_2014-12-19_195029.png these pcm's are they supposed to be the same part number like 606AH? edit. yes they are i think it originally had a 606ah in it the other guy bought a different one and i bought a...

the white connector 31 should be 5v, i dont have 5v does the skim kill the power to the pcm? https://www.cherokeeforum.com/attachments/f2/328113d1501257967-not-getting-power-fuel-injector-pcm-97pcmc2.jpg

pin 22 is fused B+, with key on i have nothing pin 32 and 31 i get voltage on the dmm if i go from batt + to each pin im testing the black connector need to find the grey and white connector next http://ww2.justanswer.com/uploads/djenn434/2011-01-22_044903_connector_0000.jpg

i went to a wreckers and got another ecm and skim but he couldnt find the key but will keep looking. i tried to take the harness but its sitting on the ground with no tires and cant get to the transmission. $100 with some other odds and ends think i found a guy that can reset the ecm BUT when i...

im going to try and find the pin wiring diagram for the 3 plugs that go into the ecm and make sure i have power going to it. if theres no power the obd2 wont read it found this article explaining how to reset the jeep ecm, hopefully if i reset with the skim unplugged the security/key light on...

just talked to a guy that can program the ecm to the skim, up here in Vancouver Canada he charges $300 to do that but because the the scan tool wont talk to the ecm, he says that used ecm is nfg i need to go and see if if the other guy unplugged some wires somewhere. i asked if he could just...

got a blue driver scan tool, hooked it up to the jeep and got nothing. its brand new never used it, it wouldnt give any info. hooked it up to my 2010 caravan and it works perfectly. went searching and the 3 block computer is an ecm? and the key light is security. and the wcm is the skim and as...

the old 3 block computer thing was rattling when shaken, opened it up and a chip blew apart. do i have to get my key reprogrammed to match the new computer? i have a key light lit on my dash lit up

it was always under powered, its a 29.5 ft bayliner encounter with 1 motor and most have 2-350's in them. i hit hull speed at 1800 rpm with a high thrust prop on it. i just basically use it like a trawler to putt out to some sturgeon holes and drop anchor and a eulachon;)

yes, i emailed the adapter company because you can see there are no kits for the jeep 3.7L and they said no, they dont make adapters for the 3.7L auto. kind of *****, i found a cheap 2002 jetta salvage car for $500. my boat had a 5.0/305 that just blew a cylinder. i was going to put a 3.0L in it...

i just picked up a 2002 liberty sport that would stall after 30 seconds, that was the ad. when i got there it was a mess, guy didnt know anything but thought he was a mechanic. one fuel injector was misfiring and he just drove it til it died 2 months ago he swapped the computer but it wont start...