Recent content by Fur Trapper

I was going to do wheels and tires at the same time. I'd do a lift but I'd want larger tires at the same time as the lift and that might be out of my pocket money budget- I'd have to save a bit first.

I saw that sticky post on offsets, backspace, moonspace etc, but I can't make heads or tails of it. My brother asked me if I did much wheeling on the curbs at the mall with my new KJ so I thought I'd begin making it look less like a chick's jeep, as he put it. I ordered the tee-clamps to...

I had my wife drive it around the court and the noise was from the rear and not the front- glad I didn't replace that CV drive shaft. I took the rear driver's side wheel and caliper off. Then I beat the snot out of the rotor and it wouldn't budge so I broke out a pry bar and it came loose and...

I found no radial movement in the joints but all four up front have some axial play. Not sure what to make of it. I might go ahead and change the driver side and see if it goes away. I also put some silicone on the center hub caps to eliminate that as a possibility.

This seems inexpensive to me. http://www.autozone.com/autozone/parts/Duralast-Gold-CV-Axle/2003-Jeep-Liberty-4WD/_/N-jkjqiZ6o2dc?itemIdentifier=402067_0_4281_78655 I haven't checked it for any play yet. This would be all I need though, right?

[ SOLVED ] Click, click, click- new KJ owner trying to troubleshoot noise I purchased a 2003 Jeep Liberty Limited 3.7L 4x4 recently. I wanted something that could handle the mud and snow in the fall/winter when I am out trapping. Last few years I've used the family mini-van because I've had no...