Recent content by DavidG

Solved Thanks again for the manuals. I removed the A-pillar trim to see the existing rear hose and just fed a new hose in through the firewall grommet and connected it with a fitting to the existing hose. It all works again now.

Thanks for the field service manual links and pictures. I have the front washer working now and both hoses connected to the reservoir pump. It looks like the rear washer "headliner hose" through the firewall has the grommet built into the hose, rather than separate with a fitting like the front...

where do the washer tubes connect? Since a hungry mouse ate the washer fluid tubes in the engine bay of my 05 KJ, I need to find out where the tubes connect to the firewall. I see a 2" rubber grommet on the upper passenger side firewall that one of the tubes (the front?) went to but where...

Where did it go? Two of the posters in this thread and other links, all whom I would believe, state it takes slightly over 2 quarts, 70 oz, of rear differential gear oil. Why did mine take 4 quarts! then? I don't think I spilled that much.... I do have the back tires on 10 inch ramps, which...

I think you need a 7 inch straight extender for the ROLA bike rack.

The Rola TX102 has a 2.5" vertical height. It looks like the best option if you want a hitch mounted rack. It would still need a straight extender since it has a horizontal length of 7 inches and the liberty needs 12-14 inches.

That drop extension provides over 3 inches of vertical clearance to the spare when the rack is tilted down. It drops the hitch 4 1/4 inches. If the Thule could be pushed all the way into the hitch drop, then it would provide 3 inches of horizontal clearance, but there is no threading...

With etrailer's 99 cent shipping, 5 % discount code, included cable lock, included anti-sway device, and the lower price to begin, if that Rola really only has a 4+ inch vertical stinger, it looks like the best choice. Had I not already bought my Thule and the high low extension, I would have...

The "2 Bike Folding Bike Carrier for 2" Trailer Hitches - Rola TX-102" from http://www.etrailer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=E&Product_Code=59400&Category_Code=rola-bike measures 7-1/2" or 4-1/2" from the center of the hitch pin hole to the closest support bar on the...

Post a picture of that when you make it. I ordered the 4 inch high-low drop extension.

On that one the 4 7/8" is not to the top of the stinger based on the pictures. The picture shows a square piece extending above it (maybe 1/2"?). http://www.etrailer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=E&Product_Code=51953&Category_Code=BRF The Thule stinger vertical height is...

You could get this dual hitch extension to lower the bike hitch rack and give you a second higher receiver for a tow hook. However, it drops the lower receiver 6 inches and extends it 10 inches, both more than optimal. http://www.get2buynow.com/workshop/towingreceivers.html...

The vertical part of the stinger (fixed piece that goes into the receiver) needs to be 1.25" lower in order to clear the (stock size new) spare tire. I would probably lower it by 2". The draw-tite high low drop is the best solution so far, but it drops the hitch 4" which is more than needed and...

I think I am going to get the drop down hitch extender that Bennett mentioned. I am a little annoyed that Thule advertised the rack as compatible when it isn't completely. Even without that, the Thule allows the rear gate window to open.

hitch bike rack issue I just bought a Thule hitch bike rack. It seemed more secure than a spare tire rack to me. There is an issue with some hitch racks. Although Thule advertises the Hitching Post Pro 936XT as compatible with the Jeep Liberty, the vertical part of the fixed L blocks the...