Billwill
Latest activity Postings About
-
-
Billwill replied to the thread Brake Light stuck on. Help.What Year/Model is your Jeep? I hopefully have the Logics for that model and can advise you....I really do not see what the Master... -
Billwill replied to the thread 06 kj rear brake lights issue.What I have often done....since my wiring got damaged after my GF hit a tree that jumped in front of causing lots of wiring damage....is...
-
Billwill replied to the thread 06 kj rear brake lights issue.Thanks.....I am battlimg with my Laptop as the whole Motherboard has just been replaced!
-
http://www.colorado4wheel.com/manuals/Jeep/KJ/ that should work
-
Billwill replied to the thread 06 kj rear brake lights issue.Download the Service Manuals for your year KJ....Section 8W has the Logic Diagrams for you to be able to climb in with your Multimeter...
-
Billwill replied to the thread Help! My 03 Jeep Liberty’s battery died and Sepentine belt came off..Yeah I had to split all the metal idlers on my CRD and replace the original "Rivets" with High Tension nuts and bolts and "Loctight" on...
-
Billwill replied to the thread Help! My 03 Jeep Liberty’s battery died and Sepentine belt came off..Is this a Gasser or a CRD? I can offer some advice if yours is a CRD but I know nothing about the Gassers!
-
Billwill replied to the thread 2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all.There is a common problem with newer CRDs in that when ABS was introduced the wiring harness on the LHS was shifted upwards in the...
-
Billwill replied to the thread P0340 - fishing for ideas.I do not understand what an "L4" Liberty is! Is this a Gasser or a CRD?
-
Billwill replied to the thread 2005 Liberty Jeep Limited.Love my 2002 2.5L manual CRD...the first models came out as 2.5 Litres! Diesel is cheaper here in SA than Petrol....that which you...
-
Billwill reacted to heartfulaluv's post in the thread 2 threaded holes on the back of the cylinder block with
Like.
Thanks... I happened to have some 8 guage copper strand that I decided to use, and bought some 6 guage to add to the battery grounds. In... -
Billwill reacted to KJowner's post in the thread (Probably Silly) question about CRD MAP sensor with Like.
There are 2 sensors in the package, temperature as you say is easy enough to test on pins 1 & 2, pressure would be a lot more involved...
-
Billwill replied to the thread My CRD has got the runs!.OK I decided that I needed to replace my Clutch, Flywheel and Crankshaft end seal or else I would have to scrap my beloved 2002...
-
Billwill replied to the thread (Probably Silly) question about CRD MAP sensor.I have the 2002 2.5L Export CRD with a fixed-vane Turbo....they only made the 2.5L for that one year for the Export market! Both on...
-
Billwill replied to the thread 02 jeep liberty limited.There is a drain pipe for the Air Conditioner.....after driving for a long time in warm weather with aircon ON ice forms and water will...
-
-
Loading…
-
Loading…
