-
-
I talked to a transmission shop manager today (he got me a torque convertor for a 67 Dodge RT 440 restoration), and he thinks its most... -
KJowner replied to the thread Rear suspension or axle clunk when getting on or off the gas..+1 for KYB
-
KJowner reacted to atikovi's post in the thread Rear suspension or axle clunk when getting on or off the gas. with
Like.
Problem found and fixed. I had the truck up on jack stands and pry barring every suspension part I could reach but didn't see any play... -
KJowner replied to the thread Transmission leak.Have you asked why can't they just replace the pump or its seal? I'd get a second opinion, it sounds very expensive replacing a whole...
-
KJowner replied to the thread Looking for a steel back bumper set up.Looks like a custom one from long ago, there's enough detail in the picture to mock one up from cardboard and wood, it's easier and...
-
Quick Update (2) Oem Engine Core Plugs “one above the starter, one above the right motor mount New Front right Motor Mount Oem Mopar...
-
KJowner reacted to CheapJeep'n's post in the thread Rear Upper Control Arm Torque Procedure with Like.
Thanks for the reply, I think I'll torque them down on the ground. I'll at least feel better about it.
-
With an ‘04 and ‘05 Liberty as daily drivers my experience is these replacement rear control arms do go out too soon. It matters which...
-
KJowner reacted to DadOSix's post in the thread When I put motor oil in my 02 kj ,what's the plastic piece? with Like.
Mopar Parts Oil Fill Baffle 53032126AA...
-
What the marks on the temperature gauge represent. Normally it should run very close to the 176 deg. mark. Just slightly below the...
-
Hi, I'm the owner of a 2006 3.7 4wd KJ Liberty. It has 335,000 miles on it, so just getting broke in. I've got a couple things to...
-
KJowner replied to the thread Rear Upper Control Arm Torque Procedure.You are quite right for normal bushes, unfortunately when they designed the upper arm they put the bushes in the wrong plane for some...
-
Got the new starter in Bert. All is well. Up and running on the factory drive train with 300k miles on it. Kids bought the wrong one...
-
KJowner replied to the thread Remove stripped Torx from EGR.Don't know what the access is like but I usually just weld something to rounded bolts so I can spin them out
-
KJowner replied to the thread Rear suspension or axle clunk when getting on or off the gas..I bought them off Ebay.
-
-
Loading…
-
Loading…
