DadOSix
Latest activity Postings Media Albums About
-
-
DadOSix replied to the thread 3.7L liberty not starting after fixing PS fluid leak.hmm - something does not add up here. You worked on the PS and then the security lite comes on afterward - did you all remove / drop... -
DadOSix replied to the thread 2007 AC needs replaced.Here is a fun fact - my 04 was eating refrigerant every few days to a week. Lib was in Baltimore for an extended time and when I went...
-
Yes but to be that low with system not running would be very low on refrigerant or very cold outside. I got the new transducer yesterday...
-
I have a couple of manifold sets, I did not connect to low side and I expected the same pressure
-
DadOSix replied to the thread Help with AC system.I cant recall. Are you reading low side with a manifold set or going off the gage on a charge can unit?
-
DadOSix replied to the thread Help with AC system.Ok - i see that. So - what are your high and low side pressures? Jeep off - Manifold set blue to low port and red to high. These...
-
DadOSix replied to the thread Changed starter in 06 KJ and it still wont start.Agree with 3bar - ground ground ground. But we gotta know —- where is this splice located? Because if it worked before and you had to...
-
DadOSix replied to the thread Help with AC system.First thing is you need to find that leak. The oil on the HP line is almost a dead give-away. Any place you see oil on an AC system...
-
Thanks DadOSix, good input, I'll check that out when I'm able to get in there.
-
DadOSix replied to the thread Rear hatch glass will not close after battery died.see post 4 above - i bet your catch is closed. You can open it with the manual over ride button shown there with the red x on it.
-
DadOSix replied to the thread A/C Stays on in Heater Mode.It is a feature - the compressor runs to keep the moisture in the cabin air lower. Defrost mode runs it so you do not get ice on the...
-
DadOSix replied to the thread 05 JEEP LIBERTY LIMITED EXHAUST SMELL BURNING OIL SMELL.check the pcv valve piping. It is brittle and splits easily - will not usually leave a drip like a leak, but will fail a smoke test and...
-
DadOSix replied to the thread Drum brake adjuster troubles.Also - the above is great info. Consider another look at your backing plates. If there are grooves worn where the shoe contacts the...
-
DadOSix replied to the thread How To: Change front driveshaft / change a driveshaft head.Nice job! I have done a few - maybe 3x, but don’t recall the shift bracket info. Maybe I could have finished sooner. Usually pull the...
-
DadOSix reacted to HerronScott's post in the thread How To: Change front driveshaft / change a driveshaft head with
Like.
Sorry to resurrect this thread but it was a big help (and of course I watched a few Youtube videos as well). Driveshaft Parts kits were...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
![5231321 1[3]](/data/xfmg/thumbnail/3/3526-3b6fe35079b0522ff00b2b10e9fba19b.jpg?1623784620)
Members online
No members online now.