Transfer case stuck

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mike1980

New Member
Joined
May 2, 2022
Messages
4
Reaction score
0
I was driving my 03 limited when it made a grinding noise and wouldn't pull itself. Trailered it home and shifted the transfer case to the 4 high position and backed it off the trailer. There is no front drive shaft in it. Wasn't in there when I bought it. Now it seems to be stuck in 4 low but the shifter won't go that far. I know it needs the bushing in the linkage but I don't know what else to do. Really don't want to have to pull the transfer case out but will if necessary.
 

JeepJeepster

Full Access Member
Joined
Dec 15, 2004
Messages
8,904
Reaction score
292
Location
Dem hollers in Ky
Can you move the lever on the transfer case by hand? Please keep in mind the position next to 4low is NEUTRAL. Dont run yourself over.

You may need to jack up the rear of the Jeep and move the tires a bit to get it to shift.
 

Mike1980

New Member
Joined
May 2, 2022
Messages
4
Reaction score
0
Can you move the lever on the transfer case by hand? Please keep in mind the position next to 4low is NEUTRAL. Dont run yourself over.

You may need to jack up the rear of the Jeep and move the tires a bit to
I took the shifter off from the top. I can get right to the arm from inside. It moves but nothing changes. I even moved the lever with the jeep rolling. 4 low is where it stays. It won't come out
 

Latest posts

Members online

Top