Stock Liberty 2005ish ride height

[Moab]

I'm trying to figure out how much lift was done to my Liberty. If someone with a stock Liberty somewhere around 2004-2005 could give me a stock height from center of front wheel to bottom of front flare I could get an idea what's on the truck.
Appreciate any help.

You must be registered for see images attach

 

[HoosierJeeper]

Well...my stock springs have sagged about an inch. (18/18.5)

So...factory height is 19" in front, 19.5" in the rear...

 

[Moab]

No pucks at all. It's all spring - just a thin isolator between spring and seat made of rubber or urethane.

Thanks for the ride height HoosierJeeper

I'm at 21" now and the lift is at least few years old so It's probably a
2 to 2 1/2" lift.

Whatever lift it is is a good one because it is very nice on and offroad. Makes my 03' Wrangler feel like a tank.

Thanks for checking - greatly appreciated.

 

[HoosierJeeper]

No prob.

 

[Moab]

I can't find any markings, tags, nothing. But it rides great - not too stiff not too soft. I will need shocks at some point...I've have to give a supplier a resting length and go from there.......

 

[ms5490renegade]

I can't find any markings, tags, nothing. But it rides great - not too stiff not too soft. I will need shocks at some point...I've have to give a supplier a resting length and go from there.......

lets see a pic.
my ome springs i think said ome on the spring.
what about shocks? any colors or stickers?

 

[Moab]

lets see a pic.
my ome springs i think said ome on the spring.
what about shocks? any colors or stickers?

I'll post a couple up tomorrow. I'd really like to find out so I can get a set of shocks at some point.

 

[ptsb5a]

I'll post a couple up tomorrow. I'd really like to find out so I can get a set of shocks at some point.

Front shocks extended and compressed won't change from a stock unit. the rears however will. Check the Lift Kit section. Theres good info there on Ranchos, Blistiens et al. Or, go to Rancho's web page and check the online catalogue. Look up RSX17004 or RS5284, shocks for a '00 Dakota or Durango, the extended and compressed lengths will be listed there.

 

[Moab]

hey thanks for that info. Great!