BNJ-KJ
New Member
I made some front seat extension brackets because I'm tall and the Liberty leg room stinks. I made the front brackets a 1/2" thick to give the seat a little more rake to it. For mounting hardware you'll need 4 - 1/2" x 1 1/2" bolts with nylon locking nuts(at least that's what I used). Here is a drawing of dimensions for the brackets. Let me know if I need to add anything else to this!
This pic shows why I had to make them with a 3" extension. You can see if it was much shorter the stud would hit the seat bracket. This is only on the left rear. The other mounting points use bolts.
You must be registered for see images attach
This pic shows why I had to make them with a 3" extension. You can see if it was much shorter the stud would hit the seat bracket. This is only on the left rear. The other mounting points use bolts.
You must be registered for see images attach