Just installed my Mopar kit last night ('02 sport). To anyone doing this in the future, here are some suggestions:
1) If you want your fog lamps to stay on with brights and marker lights, splice the violet wire on the mopar harness into the Black/Yellow wire on your left front marker/turn...
Would the same be true for an EVIC? I just got back from my local parts dept and they said the intrepid wire harness was over $400 (10x that suggested on another site). I don't know if the EVIC I have coming has the harness or not, but if not, I'll need to figure something out, and I was at a...
Okay, long story short, I wasted my money on a new servo. Oddly it worked for about 5 minutes. The solution to my problem was when i finally found the will to re-seat the wiring harness to my brake pedal switch. Works great now.
I disconnected the battery for a half hour or so, still doesn't work. I talked to my brother who had a similar problem on his '99 Grand Cherokee. He suggested that I replace the switches on my brake and clutch that turn off the cruise control when you use the pedals. His problem was the brake...
I tried turning the ignition on and off a few times, but no luck. I haven't tried disconnecting the battery, but disconnecting the servo might have the same effect? I think I'll try anyway.
Hi, I installed a cruise control system in my '02 KJ as per this article: http://www.jeepkj.com/forums/viewtopic.php?t=4947
I put in the steering wheel controls last Friday, and the servo yesterday. When the controls were in but no servo, I could make the cruise light come on for a few...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.