Search results

Just installed my Mopar kit last night ('02 sport). To anyone doing this in the future, here are some suggestions: 1) If you want your fog lamps to stay on with brights and marker lights, splice the violet wire on the mopar harness into the Black/Yellow wire on your left front marker/turn...

Well, my EVIC came with the pigtail, so no worries there. I just finished my install tonight and it works great! Couldn't be happier. :)

Would the same be true for an EVIC? I just got back from my local parts dept and they said the intrepid wire harness was over $400 (10x that suggested on another site). I don't know if the EVIC I have coming has the harness or not, but if not, I'll need to figure something out, and I was at a...

Okay, long story short, I wasted my money on a new servo. Oddly it worked for about 5 minutes. The solution to my problem was when i finally found the will to re-seat the wiring harness to my brake pedal switch. Works great now.

I disconnected the battery for a half hour or so, still doesn't work. I talked to my brother who had a similar problem on his '99 Grand Cherokee. He suggested that I replace the switches on my brake and clutch that turn off the cruise control when you use the pedals. His problem was the brake...

I tried turning the ignition on and off a few times, but no luck. I haven't tried disconnecting the battery, but disconnecting the servo might have the same effect? I think I'll try anyway.

Hi, I installed a cruise control system in my '02 KJ as per this article: http://www.jeepkj.com/forums/viewtopic.php?t=4947 I put in the steering wheel controls last Friday, and the servo yesterday. When the controls were in but no servo, I could make the cruise light come on for a few...