nick25crd
Member
i saw somewhere, i don't remember where,that is possible to clear codes with the key,is it?how? (02,2,5 crd).
Codes
- Thread starter nick25crd
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
journeyjim
Full Access Member
- Joined
- Oct 23, 2008
- Messages
- 566
- Reaction score
- 0
Key on then off, do not start. I don't remember how many times, I was thinking that it was three times.
Good Luck
Good Luck
Billwill
Full Access Member
As far I as I have experienced with my 2002 2.5 CRD, this process will display the codes....from the oldest to the newest...but does not erase the codes.
I have tried all the supposed tricks to erase the codes such as disconnecting the battery, disconnect battery and short positive cable to ground for 10 minutes etc. but nothing seems to work.
It seems to me that to erase codes that have been logged...a scanner needs to be used and that the early KJs use the PCI format while later (2006?) KJs need a scanner that does CAN bus.
To actualy clear any offending warning light and "pings", you need to first fix the problem and then the error clears after a certain amount of running cycles.:shrug:
