Search results

Ok, got under the jeep, checked out the transfer case shift cable. Seems to be secure and tight. Attached to the shift lever securely too, as far as I can tell. Tried to push the lever forward (backward?) towered the rear of the vehicle because I think the last positiOn in that direction would...

J-Thompson, so you are thinking the linkage is just not shifting it all the way and by shifting it by hand, I can get it to move completely into position? If it does turn out to be the linkage, i assume it's adjustable because it is a cable?

Well, after checking the tread depth, at least on the driver's side, I think there is about 1/8" difference between the front and back tires. I guess that's my problem. So now what? Are new tires the only answer? Or is there some sort of trick I can do? I'm not sure how 4wd gears...

Tjkj, I filled the tires to 35 psi each this afternoon with no luck. I will see if there is a lot of difference with tread depth. Also checked the transfer case fluid earlier today too. Fluid poured out when I removed the fill plug. So transfer case fluid was up to the correct level. I'll go...

I just took it down the road and tried shifting to and from 2wd, 4 part time, and 4 full time with the transmission in neutral. Tried it while moving. I think I tried it in neutral while sitting still in my car port earlier. I've never had it act like this before. Completely stumped. What...

I believe I've tried it both ways. I will try it again.

Checked out the linkage and bushings. They look ok to me. Had my wife shift the lever while I was underneath and it seemed to shift just fine. Any other ideas what it might be?

Last night driving home on a dirt road, it was raining lightly, so I put the liberty in full time 4 to help with traction. I thought it engaged because it usually doesn't put up any fuss. When coming to the main paved road, after pulling on to it about 10 seconds or so later, it started...

no its cool, i realized it was a crappy pic when i posted it. My camera sucks. :)

Well, by brand new, i mean it was purchased and installed just over a month ago. About the middle of February. So yeah, not BRAND new. I didnt just pick it up at the parts counter, but its new enough to where there should be no problems with it. I drive a paper route 6 days a week, about 25...

heh, yup. sure is.

Well i wiped the sensor clean, all lights were still on. Unhooked the negative terminal from the battery and the CEL went away, but both brake and ABS lights still on. This is really pissing me off. This Jeep would be perfect if it didnt have this annoying problem. Guess its back to checking...

Hey everyone, i had recently had problems with my rear speed sensor/wires, had the shop "fix" it (they couldn't find the problem, but it cleared itself up for about a month or so). Anyway, i started noticing the ABS pulsate when it shouldn't have been, off and on. Then the ABS light and...

dont say that! because i have no idea what else it could possibly be! Thats why im going to stay positive and act like its not going to return :)

Well, last week i had the mechanic check the continuity of the speed sensor wires and pull the the cover off of the rear differential to check the tone ring. I stopped in today and asked what he had found, and he said the wires were fine and getting voltage. He even had someone wiggle the...

I think i will ask them to do that. But first, i think i will ask them to take a multimeter and check continuity from the speed sensor connector to whereever the harness connects to the computer. I would rather rule out the wire connection and even the less likely tone ring before i ordered a...

What do you mean by the sensor not being 'placed' correctly? I was wondering about if there was still something wrong with the wiring back there. But since he replaced the rear connector, i dont know how there could still be anything wrong with that sensor back there. I figured he would...

Yeah, the mechanic said that there are the two in the front and the one in the back, but he is only pulling a code for the one in the back still. And even if it were one of those sensors, the speedo is still not working. So is it even possible the PCM or BCM could be not communicating...

Well, took the liberty to a shop to install a new connector for the rear speed sensor. No luck. Still getting the ABS and brake warning lights and speedo is still acting funky. The mechanic said he thinks it may be the module that controls the ABS?? I am assuming its the Powertrain control...

Ah, i see :) No, as i recall, the light stays on even when i work the parking brake lever. Hopefully these guys at the shop are competent enough to fix this thing without throwing tons of other parts at it. This garage and another i didn't bother going to keep mentioning the speed...