Search results

  1. G

    Fuel regulator buzzing

    Yes, The buzz is present with the ignition on and the engine off. I can't hear anything when the engine is running, The diesel sound is loud...
  2. G

    Fuel regulator buzzing

    I removed the fuel filter and applied black engine gasket sealant. There are no more bubbles, but the buzzing is still there, and the car still shuts off at idle. I'm going to check, clean, or replace the Crankshaft position sensor...
  3. G

    Fuel regulator buzzing

    Very good, I'll look into it.
  4. G

    Fuel regulator buzzing

    Fuel regulator behind the cp3 pump. Today I installed a low-pressure electric pump with transparent hoses, and there's a lot of air coming out of the air filter. I think I've found the problem. More news soon. Thank you very much, Kjowner.
  5. G

    Fuel regulator buzzing

    Do you know a cheap scanner that is compatible with the 2003 Jeep 2.8 CRD?
  6. G

    My 2003 KJ 2.8 CRD and its problems

    Continued. Key reprogrammed, everything is fine. Everything works, even the alarm.
  7. G

    Fuel regulator buzzing

    The Jeep starts fine but stalls at idle or at a stop sign.If I accelerate above 1200 rpm, it doesn't stall.
  8. G

    Fuel regulator buzzing

    No, but I plugged another one into the socket and it was buzzing too. I checked the continuity of the wires between the PCM and the regulator, everything seems ok.
  9. G

    2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all

    There is the pump pressure regulator that vibrates
  10. G

    2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all

    He said look at the wires under the battery mounting Thanks
  11. G

    Fuel regulator buzzing

    Hello everybody, My 2003 CRD export starts very well but turns off after 30s at idle, if I accelerate to 1700 rpm it does not cut out. The fuel regulator sensor is buzzing and that's not normal. Do you have any ideas? Thanks
  12. G

    2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all

    Hi, Can you show me the place because I don't understand with the translator. Thanks.
  13. G

    Manipulated PCM

    The ECM corresponds to 2005 crd
  14. G

    Starter kit

    Micropod II clone and DRBIII émulator
  15. G

    Starter kit

    Thanks my friend
  16. G

    Starter kit

    It's fixed. To turn off the solid red light, I changed the country in the BCM with BRBIII and Micropod.
  17. G

    Starter kit

    I'll be back when I get the DRBIII...
  18. G

    Starter kit

    Thanks KJowner
  19. G

    Starter kit

    The flashing red light is when I open and close the doors with the remote control. There is no code P1685 since I changed the skis, skim and the pcm. Only solid red light remains.
  20. G

    Starter kit

    No I haven't tried to start it, The starter turns but it doesn't start

Random media

2/23/2009 Husky Liners Floor Mats
561312666
After feeding, friendly bird rests on warm finger. One below the jeep and other enjoys warmth of hatch glass!
Jeep
Dirty Avatar
Working on the front end.
04' 4.7L HO engine
My 2005 Liberty Renegade 6
2014 04 25 17.56.48

Latest posts

Members online

Total: 379 (members: 4, guests: 375)
Top