Search results
-
P
Is this video accurate for a u joint replacement in my Libby?
at 8:45 you can see he bashes on the drive shaft yoke in order to seat the U-Joint, if you hit to hard you will bend the two yokes together -
P
Is this video accurate for a u joint replacement in my Libby?
i wouldnt use a hammer to take them out....(if anything to take them out, and bring the new ujoint to a shop to press it in... DO HALF THE WORK AND pay for half i did mine and used a press.. i mean the hammer is cheap and most people have. If you miss you can damage the drive shaft...... -
P
What did you do to your jeep today?
come make my engine bay look like that.. mine looks like a mud puddle threw up all over everything- projectkj
- Post #11,321
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
well i guess its not what i did today (as its 10am and no way i did this all in 2 hours) but oil leak on driveway after a 2 hour drive last week (friday), rear main seal was gone. This only 7 months after putting in a 80,000km motor in (in hind sight i shuld have done it then, but 7months ago i...- projectkj
- Post #11,305
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
l got a little sick of the stock rims on the liberty and want to eliminate the steel wheels... although i do offroad a fair bit, the stock rims served their purpose. but just on the inside of the stock rim is a 1" grove that collects alot of mud 2-3 lbs of mud, and greatly throws the balance...- projectkj
- Post #11,007
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
found out i have a crack in the rad, not a huge leak.. but ordered a new rad.. so again jeep is down for the count.. dont want to damage my newly swapped motor- projectkj
- Post #10,637
- Forum: KJ General Discussion
-
P
Winch Bumper
not sure if air bag works, but with a bump like this i am not going to be the one who needs attention after i hit something.... JK bumper will work with enough time and fabrication.... bit the mounts have to be roughly 5-6" from the stock from frame..- projectkj
- Post #31
- Forum: Fabrication
-
P
What did you do to your jeep today?
not today, but went away with a few friends, took the tent trailer hit the trail for 6 hours...waiting on pictures / videos from other peoples phone... truck was awesome, climbed some awesome ledges, went through some nasty holes.... only problem was a bolt on strut town apparently came loose...- projectkj
- Post #10,402
- Forum: KJ General Discussion
-
P
Winch Bumper
i didnt want to loose fogs (YET), but as i found out i need MARKER lights at the front, i may have to try and find some that fit in that spot.. then i will wire my last 10" LED bar to the BULL bar on my fog light circuit.. 1 x 10" bar has less draw that 2 incandescent bulbs on the fog circuit now- projectkj
- Post #28
- Forum: Fabrication
-
P
Wheel noise/vibration
i dont think you would get a big vibration on the wheel bearing.. would sound like metal on metal grinding....- projectkj
- Post #8
- Forum: KK General Discussion
-
P
Winch Bumper
YES (cringes like you may or may not like them) they are not as noticeable to oncoming traffic as i thought.. plus i need to add orange LED's that stay on all the time as clearance/marker lights- projectkj
- Post #26
- Forum: Fabrication
-
P
What did you do to your jeep today?
oh almost forgot took my liberty after fixing valve cover leak to go get some beer and a prescription, got a compliment on my bumper and light bar.....finally washed out the mud in my steel wheels from about a month ago, many its nice to have balanced wheels ****do not panic this will not be...- projectkj
- Post #10,364
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
thank you everyone else for the support... all i did was share a picture of what i have done today, and started my own post about what i have "FABRICATED" in the other section.... a private message would have been much easier....- projectkj
- Post #10,363
- Forum: KJ General Discussion
-
P
Winch Bumper
painted front grille black, and added the BULL bar- projectkj
- Post #23
- Forum: Fabrication
-
P
What did you do to your jeep today?
decided to put on the bull bar, and paid the front grill / light surround black looks way better- projectkj
- Post #10,356
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
its a 5meter strip of 5050SMB 60led's per meter, purchased of ebay you can cut in every 3 LED ships, all i did is drill a small hole in the end of the area where the incandescent bulb is (under the clear glass reflector)- projectkj
- Post #10,355
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
Oh shit... What now....week before getaway... Naaaa just fixing leaky valve cover gasket.... Plus thank you Daimler Chrysler for POS plastic valve covers (there was a 1/4" hole in the back corner, but that's not where it leaked from) on a better note, while waiting for things to dry...- projectkj
- Post #10,349
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
purchased all my lights direct from a manufacture out of China. HUACHUAN CO.,LTD i am not endorsed by them in any way... came across them once and i have ordered from them twice... the front bar coast my $80, the rear flush mount lights caost me $8/each and i have 2x12" bars that i paid i...- projectkj
- Post #10,345
- Forum: KJ General Discussion
-
P
What did you do to your jeep today?
maybe in time.... dont have much time to work on it this week (late shift all week, watch kids in morning until mother-inlaw gets here) plus im going on a weekend off road adventure this weekend.... maybe after nextweekend. all i have to do is patch two small roof holes (and i plan on...- projectkj
- Post #10,343
- Forum: KJ General Discussion
Staff online
-
LibertyTCWell-Known Member