Search results

Thanks for the info. I will try and get back to all about my success...or no success

The electrical plug was removed completely from the actuator and boom, 48 hours later the car is dead, dead, dead. I guess it was not the actuator. I will hook the power to the actuator back up and look at the other items that are accessible on this circuit.

I have not heard multiple clicks from a single door actuator. Just each actuator opening/closing when the door switch is activated. The car is sitting now with the actuator disconnected. I should see the parasitic result in a day or two.

I have a parasitic battery drain isolated to fuse 34. My suspect component is the passenger lock actuator. I unplugged the electrical connect (directly from actuator, not switch). Now only the unlock portion of all door lock switches work...the lock (down position) function does not work. Any...

I changed out my front ball joints and now I have a "clunk" sound on the front passenger side. Any suggestions for diagnostic tests are appreciated as well as ideas for what is happening. All nuts are tightened per torque recs. All new parts were installed.

I left my 03 liberty sitting for a couple weeks and when I went to start the engine, it was completely dead. I hooked up a micro emergency start battery and it did not even see any voltage to start the car. The auto parts store said it was a bad alternator. I changed the alternator and it fired...

just bought a used liberty and the access panel for the washer fluid pump is missing. just a hole in the wheel well where i can see the headlamp and washer bottle. i cannot find the access panel door on any parts diagram. i thought i would fabricate one out of hard sheet plastic. anyone have a...

Changed my valve cover gaskets out this weekend. Besides what New Jeep Owner stated in his procedure, I also removed and set aside the cruise control and unplugged the coolant hoses from the fire wall. This allow much more room to remove the cover from the passenger side. To take off the black...

Parts diagram has a gasket between the oil filler tube and the block. I am replacing both valve cover gaskets this weekend and will attempt to post link to video. I believe the cover bolts are torqued to 105 in/lbs.

I would like to know how to replace the washer fluid tank.

Just bought an 03 Liberty with 90K miles. I have been DIY on BMW for about 10 years now and dang..the liberty engine compartment looks BMW like. My tools even work. Teen age son loves the Liberty. Like most emthusiasts I will be changing alot of fluid, belts, hoses, shocks, plugs, etc with the...