Search results

  1. KingKJ

    Power windows swapped to crank windows

    how rare is it to find the parts for crank windows on all 4 doors of a jeep liberty? I'd like to swap my power windows to be crank windows when I turn it into a trailer. did any libertys have keyed locks on any of the doors other than the drivers door?
  2. KingKJ

    What size bolts are used to mount the skid plates?

    I took of my transfercase skid and 3 out of 4 bolts tore the part inside the body/crosmember out and I need to find the size so I can sell the skid plates to someone, anyone know what size the bolts are?
  3. KingKJ

    removal of transmission in a day, is it possible?

    so i'm going to be attempting to remove my transmission out of my jeep liberty in the span of about 1 and 1/2 daysish, Any tips on how to get this done such as shortcuts I can take? If I have to I can do it over more time, but I'd prefer to get it out as quickly as possible. I'm not replacing...
  4. KingKJ

    05 Jeep Liberty Part Out

    Almost all the parts from my 2005 jeep liberty are for sale except for rear suspension and exterior parts, everything else needs to go. Below will be the links to my Facebook listing for local, and I will update with an Ebay account once I have that. Located in Clinton Ut (84015). I can do cash...
  5. KingKJ

    how to drain fuel

    What is the best way to get the fuel out of my liberty? My liberty decided to die on a full tank of gas so I need to try to get the fuel out of the tank, so far my best idea has been to just cut a fuel line and let it drain out by turning the key to on and sitting there letting the fuel pump do...
  6. KingKJ

    Rear Swing Gate

    Is there any way you can modify the rear swing gate so that the glass opens and closes normally even if there is no power to it. I'm tearing mine apart and need to take the battery out and would like to be able to open and close the swing gate without electricity, in the future I'll probably run...
  7. KingKJ

    redneck me is calling(Trailer conversion?)

    so I just had the idea to turn my blown up jeep liberty into a trailer lol, I have no idea if i'm going to do it, my main concern is weight, so would anyone have any idea about how much the engine, trans, gas tank, front suspension, etc would weigh? pictured below is kinda whats going through my...
  8. KingKJ

    wheel backspacing

    What is the stock backspacing on the stock wheels for the liberty? Also if anyone has tried to fit stock wheels from a liberty onto a XJ I'd like that input as well, I'm trying to figure out if I'll be able to salvage my newish tires from the liberty and put them onto my next rig(most likely XJ)...
  9. KingKJ

    Knocking Noise and Metal in Oil

    Well right after I started ordering parts and getting ready to fix my jeep it started having a random knock. There isn't any rhythm to the knock but it is there (https://photos.app.goo.gl/dUmFBhvaNWBpRs1dA) video clip if it works, it's the loud knock that happens occasionally. Once that happened...
  10. KingKJ

    Rear sway bar

    Should I bother to keep my sway bar around in the rear once I lift my jeep? I've heard that you shouldn't run disconnects on the front(if this is wrong let me know), I've also heard that the rear swaybar isn't doing much, is it advisable to keep the rear swaybar or will it be fine without one?
  11. KingKJ

    How to adjust Iron Rock Offroad control arms

    I am going to be installing IRO control arms with my new lift kit and am wondering how you adjust the control arms, and how do I tell where to correctly adjust them too? I haven't order the parts yet so I'm unsure if the instructions in the box will include this information or not.
  12. KingKJ

    Top end rebuild parts

    I need some help locating some quality parts to do my top end rebuild with, preferably in a kit and maybe some parts that aren't included in the kit that should be replaced on a motor that is 225k miles old. Luckily after scoping the pistons it appears the lower part of the engine won't need to...
  13. KingKJ

    Replacing Head Gaskets

    So pretty much I discovered this last week that my Liberty is burning oil at a quick rate and it is most likely a head gasket issue. I had to drill holes above the cats after a vacuum line failed and I've been getting small amounts of oil leaking from the holes I drilled as well as when starting...
  14. KingKJ

    Breather lines

    Does anyone know how many breather lines the first gen liberty's have and where they are located(differentials, transmission, etc.) I want to raise them higher when I do my lift kit just so I don't have to worry about it later. Also what would the process be to extend them?
  15. KingKJ

    lockers

    I'm looking for lockers for front and rear for my liberty and am wondering where I can buy them and will they be compatible if I regear to 4.10 Does anyone have some links to where I can buy them or some estimated costs? I'd like to keep it as budget friendly as possible but also don't want to...
  16. KingKJ

    Do I have the parts correct for my lift kit and what is the difference between front and rear height

    I'm getting ready to do my lift kit and I'm trying to make sure I have the right parts but I also have a question about how much lower the front is compared to the rear? Parts list: OME 790 (Front) OME 948 (Rear) Bilstein B6 4600 24-139168 (Front) Bilstein B6 4600 24-139175 (Rear) JBA UCAs Iron...
  17. KingKJ

    Regearing and Locking Diffs

    I'm driving a jeep liberty with 255/75 r16 tires and am wondering what gearing I should regear too and what are the possibilities of adding in at least one locking differential along with the regearing. I'd like to get both differentials to be locking if possible, but I'm not sure if it is...
  18. KingKJ

    3-5 inch lift

    I am looking into upgrading my lift and am struggling to find the information about the different parts that go into getting a lift around 3-5 inches as well as the parts that will improve articulation. I am trying to figure out what control arms(upper/lower) and cv axles people replace to get...
  19. KingKJ

    Lift kits and IFS parts

    I've been reading about alot of different upgrades regarding the suspension of a jeep liberty with the cvs and control arm upgrades. I'm curious how much lift you can get out of the IFS if you go all out and upgrade all the control arms, cvs, etc. I would like to get at least 4 inches of lift...
  20. KingKJ

    header panel screw diagram

    I recently took of my header panel and was wondering if anyone had information about what screws go where. There are long and short screws that are all the same mm size, I'm just trying to figure out which ones go where. does anyone have a diagram of this?

Random media

245/75/16 Cooper Discoverer S/T MAXX's
fully skidded
All painted and ready to go back on
finished2
DSC00164
photo (5)
image first time the jeeps been on the sand
IMG 1098
Testing the new tires on the snow.

Latest posts

Members online

Total: 243 (members: 2, guests: 241)
Top