Search results

  1. duderz7

    What did you do to your jeep today?

    Smoke test may be helpful.
  2. duderz7

    Can I Fit ANY 4.10 Gears by Just Adding ANY Steel Dana 30 Carrier into the Dana 30a “Super”?

    The pinion gear is a different length on the 30a. The bearings will not be in the right place if you try to use normal 30. Yes they are hard to find and 4.10 is the lowest available. I had to drive over 4 hours to pull mine out of a junkyard.
  3. duderz7

    Can I Fit ANY 4.10 Gears by Just Adding ANY Steel Dana 30 Carrier into the Dana 30a “Super”?

    You can put 4.10 into a 3.73 case and carrier. But the pinion gear is unique to the 30a. No other gear set will fit.
  4. duderz7

    Gear Pattern, Is it Good?

    I think you got in the last set of pictures, but as others have said, I too am not expert.
  5. duderz7

    02 Liberty Rear axle swap

    I wanna say you just swap everything out from the backing plate on, but it's been a while since I looked at it.
  6. duderz7

    lockers

    Well, it's not the first time I've been wrong and certainly won't be the last. Definitely nice to know for certain.
  7. duderz7

    Spartan rear locker installation instructions

    I'd venture a guess it'd be the same for any Chrysler 8.25.
  8. duderz7

    lockers

    Good point. You may be correct.
  9. duderz7

    lockers

    Can't say for sure, but I think the cover is the same as the housing size and shape is the same. You could look up a gasket and see if that same part number also fits the other.
  10. duderz7

    What did you do to your jeep today?

    Bonus! You'll never be late again! Oops, I guess you'll always be late.
  11. duderz7

    Are non-ABS front hubs/bearings interchangeable, or are they left/right specific?

    I apologize if this was already stated.at the time I bought my timken wheel bearings with abs they only offered one part number to fit left or right. The abs wire does come out directionally but was very easy to route on both sides regardless. Been running smooth for years now.
  12. duderz7

    What did you do to your jeep today?

    A rubber wedge shaped door stopper is my go to
  13. duderz7

    lockers

    The damage usually happens when you get a front wheel off the ground spinning at high rpm and then suddenly coming down and getting traction or when the differential moves power from one wheel to the other quickly under power such as high rpm through mud or snow. If driven responsibly you should...
  14. duderz7

    Jeep kj 2005 front diff leak and noise

    Glad to hear there's no metal in there. Yes the plastic can be replaced with the needle bearing.
  15. duderz7

    Jeep kj 2005 front diff leak and noise

    If your Jeep is 2005 or later the "bearing" is actually more of a plastic bushing. It can be replaced with the needle bearing that comes in the earlier models. Inspect your cv splines that plug into the diff while everything is apart.
  16. duderz7

    Jeep kj 2005 front diff leak and noise

    Pictures might help us help you as some of your terminology seems a bit off.
  17. duderz7

    lockers

    Shankster has some good pointers. Rack bushings and engine mounts were both replaced when I had my diff out. They were super easy to get to.
  18. duderz7

    lockers

    I agree with the above, I have the Spartan helical up front and rebuilt the stock trackloc when I regeared a bit ago. I've found that rather than using the brakes to engage the limited slips feathering the throttle works well without the drag of braking. I've got a video of my Jeep with one...
  19. duderz7

    lockers

    If ring gear fits the carrier then I don't see why not.
  20. duderz7

    lockers

    The gears are certainly not interchangeable, but the diff carrier is. Just ask the Spartan helical diff that was built with the standard dana 30 in mind that's currently working perfectly in my dana 30a

Random media

2006 jeep Liberty Renegade kj
Going up Tin Cup Pass
Hoces Rio Duraton 2
It's not that bad, is it?
Red Rock Liberty
mi viejo kañoneeeeruuo!! este es el bichito que tenia antes del kj!
After trimming the front bumper.
Photo111
2008 jeep liberty

Latest posts

Members online

Total: 433 (members: 2, guests: 431)
Top