Search results

  1. S

    P0306 Cylinder 6 Misfire Problems

    Just want to say thanks again... this saved me a lot of grief. I took the ignition coil I previously pulled and replaced with new from cylinder 5 since the computer never showed any codes against it, and put that in cylinder 6... reset my light... I've driven it about 50miles so far and the...
  2. S

    P0306 Cylinder 6 Misfire Problems

    thank you very much for that info idaho! I'll swap that one out and see how things work out for me.
  3. S

    P0306 Cylinder 6 Misfire Problems

    CEL came on. Code for cylinder 6 misfire. Replaced spark plugs and light went off after driving for about 20 miles. Then light came back on the next day. Code still reads cylinder 6 misfire. Replaced ignition coil on cylinder 6 (driver's side closest to firewall, is the one I replaced. I...
  4. S

    Custom suspension alternatives. Need Help!

    so im assuming you have the OME set up for the rear too I guess. Did you put additional iso's on each side or just the springs and shocks... also did your lift come out pretty level and is there any sagging.
  5. S

    Custom suspension alternatives. Need Help!

    the KK front clevis' will direct fit? I didn't know that. That would definately be a much better set up. I'll look into that. Also for the rear, I was looking at the HD OME set up and probably an extra iso for each side. Not sure how much lift this should give me.
  6. S

    Custom suspension alternatives. Need Help!

    thanks for your help. it's well appreciated. I looked into the gear ratios and it completely makes sense. I really overlooked that one. 265/75/16s put me at about 4.06 and with an aggressive tread will be just about a perfect match. I've been looking at the RRO OTT strut mount coupled with...
  7. S

    Custom suspension alternatives. Need Help!

    tjkj2002... I like the factory bumpers especially with the renegade fender flares. I have no problem trimming. My only problem with the Franky lift is that damn spacer under the front spring. I would like to have all spring, no spacer... having a hard time finding something tall enough to...
  8. S

    Custom suspension alternatives. Need Help!

    they actually manufacture CV's with 3/8 machined off the front to allow the full range of the axle with a lift over 4". As from what I can see, not many people are running anything bigger than a 2.5 to 3 inch lift, however, jeepinbyal makes atleast 3 kits over this size. The maroon jeep as...
  9. S

    OME/Rancho/spacers combos

    If you're worried about CV axle complications, you aught to go to jeepinbyal.com and pick up a set that are designed with 3/8 inch machined off the front to allow full range of the axle. Set of these and you'll never have to worry about CV problems again.
  10. S

    For anybody with subwoofers in their KJ:

    FatMat! Just like dynomat at half the cost!
  11. S

    Custom suspension alternatives. Need Help!

    My question is, does anybody know if there is another jeep model that uses the same or similar springs as the KJ. Im trying to put together my own lift kit that will be perfect for my needs. Im shooting for 4in with no spacers, including new springs, shocks, struts, upper control arms, and...
View older results

Random media

IS THERE ANYTHING ELSE??
DSC01064 (Large)
fun, fun, fun
IMAG0093
black leather seats in a sport
4817.jpg
20140326 142715
IMG 20130309 122020 599
IMG 1099

Latest posts

Members online

Total: 335 (members: 3, guests: 332)
Top