You got it. I can stuff them into a Priority Mail box and it'll cost $7.15 - or I could just do first class and let you know the actual price. Let me know which you prefer - the seats are going to the landfill at the end of the week.
need tiny hands??
I took the footwell lights out of a junk yard liberty and installed them. I like having the lights at my feet - and more importantly, so does the wife. Installing the drivers side was super easy - no so much for the passenger side. I'm having trouble getting to the plug...
Went a-huntin for parts at the junk yard...
Found an HD fan and clutch(just sitting on top of a torn apart motor - didnt even have to unbolt it!)
Found wiring harness and plug for the trailer hitch
Found wiring harness for CD changer in back (someone had already removed the changer, but left...
And of course the "Chrysler Green" isn't really a green - its more a blue green. I looked at the green version of the lights in the link (thanks for pointing that out - I'm blind apparently!), it's like a vibrant Shamrock Green. And the blue are "Ice Blue"... I wish I could get an RGB LED for...
Recently upgraded to leather seats in my '05, and now I need to get rid of the old dark gray seats:
Drivers seat is intact but in sad shape - foam on the door side is crumbled.
Front Passenger seat is in good shape, but missing air-bag sensor.
Rear bench is in good shape.
All three...
I like the color of those! Three questions:
Can you post a link to your Amazon Part?
How much brighter are they then the original?
I haven't changed the color, because I was thinking it would look weird with the odometer and the overhead console stuck in that Chrysler Green color - how would...
installed both front and rear '03 Limited leather seats into my '05 Sport
Power works, seat-belt sensors work, air bag sensor works. heat is on the way.
Moved the bladder and now have a front passenger seat that is power, heated and leather - and doesn't cause any dash lights to go off. I took a ton of pictures, but I'll post them in my how-to that I make for this task. I'll have to address the power to the heat down the road when I get a more...
My wife and I installed the rear seats. It took more time cleaning the new seats from the salvage yard and then cleaning under the carpet in our KJ then it did to remove and install. No soda spills this time, but I'm pretty sure the hairy dog that they had took a dookie :dancingpoop: in the back...
After reading this... I'm still a mite confused. With the Chrysler NSG370 transmission, which fluid should I use? I am also not a believer in lifetime fluid - but looking in the owners maunal was next to useless. in the FSM however, it specifically states "Mopar Manual Transmission Lubricant...
I have the pair of switches from a 2003 Limited (Chrome) with the cable that goes to the clock-spring and that cable also has the plugs for the steering wheel radio control switches! They are different between the refresh years and I didn't know until I tried it. My loss is your gain!
$45 for...
A day late...
I decided to do some cleaning while I had the carpet pulled up. Somebody spilled some soda and left it there without cleaning it up. Mild surface rust and a sticky carpet. While there isn't much I can do right now about the carpet, I can clean up the rust. I used my drill and...
I did a test run tonight, and I was able to install the driver seat and power it with an add a circuit in the sunroof fuse location. this is temporary as ill wire it permanently to the back of the fuse block but i wanted to make sure it was working, and it is. I used my sketch-up above and it...
So I did this today:
working on upgrading to power heated leather seats... found some... uhhhh... residue under the carpet and center console. Needless to say - YUCK. Somebody had a dog that loved soda apparently because it was a sticky hairy mess under there. I took the wire brush on the...
The Sunroof fuse (22) has an Orange wire with TAN stripe and that is where I think I will tap into for switched 12v for the power seat motors. I have no idea if the wire is present, but the fuse is so now I just need to find the wire, or find the spot in the massive connector where it should go...
I have almost exactly the same scenario (gasser 05 instead of CRD) as the information on page 3 post 27 but my wires don't match up at all with his 2003.
I took the wiring harness from the donor vehicle with lots of spare wires, so I don't need to worry about the heating controls between the...
Here is a quick rendering I did of the 03 plug with the colors:
And here is a rendering of the wires going to the plug that's a combo of what I have with the 05 (two green wires) and the addition of the power and ground
I don't know how to match up the blue and green from the 03 to...
wiring for power seats (03 --> 05)
the wiring harness for the seats (2003) has 4 wires for power. I am going to assume that the red with white stripe is the +12v, and the black with white stripe is ground. That leaves 2 wires in the old (green and a very pale green/blue) that I would guess...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.