Search results
-
K
Tailgate/rear window won't open or unlock
Is there a fuse for the rear door? I'm not sure but check for that. Other wise you'll have to pull the panel off from the inside to get anything to release.- KJ604
- Post #2
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
Hubs installed. Quite easy really. I almost did, and I really thought I had for a minute, strip the head of one of the E14 bolts. Managed to tap the socket on with a hammer. That was the hardest part though. Since these hubs had been replaced just a year ago nothing was rusted too severely. Hub...- KJ604
- Post #33
- Forum: KJ General Discussion
-
K
Engine Tick 3.7L Petrol 2005 Model
Just something to try I noticed when you fill the motor with about 250ml less than what the manual says to fill it with. I did this on my last oil change and noticed that idle is much quieter now. Not sure why this works but it does. The oil will still be in the hash marks on the dip stick so...- KJ604
- Post #7
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
Picked up hubs today. SKF brand. made in korea...- KJ604
- Post #32
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
None of my local parts stores seem to supply Timken parts either- KJ604
- Post #24
- Forum: KJ General Discussion
-
K
Valve cover bolt droped into the abyss
google a scrap yard. and make damn sure that bolt isnt inside the motor.- KJ604
- Post #2
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
The skf i can get have a 3 year warranty from what I can see and the parts store near me has them for practically the same price as on rockauto. That way I might actually get them installed next Monday or Tuesday. I'm guessing I'd probably be fine waiting the week or so but for $50 maybe I just...- KJ604
- Post #21
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
i can get timken and skf. I could get the timken in a week. I could get the skf tomorrow for $50 more. I dont really care about the money. should i wait for the timken or just go with skf?- KJ604
- Post #14
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
I dont even have ABS so that sound pretty easy really- KJ604
- Post #6
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
Awesome thank you. Will do both. Hopefully I wont cook anything else driving around for a week or so.......- KJ604
- Post #5
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
thanks for the info. the hubs were replaced with these MEVOTECH H513178 More Information for MEVOTECH H513178 I know nothing about that brand, should I be suspicious? I had just purchased the jeep and did no research when I got them done. They are in the "economy'' section. great. and the...- KJ604
- Post #3
- Forum: KJ General Discussion
-
K
Front bearing shot. Just replaced last year
I'm pretty sure that at least one of my front bearings is shot again after having them replaced in October of last year. They did both sides. Is this project diy-able? Does this have anything to do with me changing my wheels out in a hurry and leaving my center caps off?- KJ604
- Thread
- Replies: 34
- Forum: KJ General Discussion
-
K
Anyone currently running 30/9.5R15's?
I think you want 16's there are only a couple of 15's that will fit- KJ604
- Post #3
- Forum: Tires / Wheels
-
K
Me and My '05 Limited, Riding On Air
Go with duratracs Jim. We finally got our first snow They are amazing.- KJ604
- Post #56
- Forum: Lift Kit Discussion
-
K
Manual trans (NSG370) fill plug wrench size
My fill plug actually came out with minimum effort. It's funny how some bolts rust and others don't....- KJ604
- Post #10
- Forum: KJ General Discussion
-
K
Manual trans (NSG370) fill plug wrench size
Haha if only it were a shorter drive that would be an awesome plan- KJ604
- Post #8
- Forum: KJ General Discussion
-
K
Height adjustment after LiftKit OME / JBA
This sounds similar to me. My rear end is fine. both sides sit 22" even w/ 948 and one extra iso per side. But my front end has 927 with .25 strut spacer and .375 clevis spacer. The passenger side sits at 22 and 1/8" which is low from what it should be with all those parts, I was expecting...- KJ604
- Post #29
- Forum: Lift Kit Discussion
-
K
Manual trans (NSG370) fill plug wrench size
Wanna come drill out the skid plate studs I sheared off?? Lol- KJ604
- Post #6
- Forum: KJ General Discussion
-
K
Grinding noise in reverse while on throttle and letting out clutch
Yea I dont think these had ever been off. The front one had a good dent in it too the two front mounting spots arent even square with each other anymore. I will have to smash it back into shape. 3 of the bolts came out very easily the other 3 sheared off maybe 1/4" below the head. Now that I...- KJ604
- Post #4
- Forum: KJ General Discussion
-
K
Grinding noise in reverse while on throttle and letting out clutch
Successful diagnosis of low transmission oil. I guess reverse is the first gear to get noisy. After I posted this originally I gradually started hearing noise in forward gears as well. Mostly when getting off the throttle at higher RPMs where the motor is no longer driving the trans but rather...- KJ604
- Post #2
- Forum: KJ General Discussion
