Search results
-
K
Me and My '05 Limited, Riding On Air
I just got a pair of N132L's and they have it stamped right on them. Im pretty sure me and Jim got the last two pairs in existance. There is ONE available on amazon.com and ONE available on amazon.ca last i checked. Update: Just looked on amazon.ca and there are TWO available again. amazon.com...- KJ604
- Post #5
- Forum: Lift Kit Discussion
-
K
KJ Transponder Key with Remote
since you one have one key with a chip i believe what you want is possible but you may have to get a dealership to do it. If you have two chip keys you can program new ones yourself. but if you only have on chip key it needs to be programmed for you. Im not sure if the aftermarket places can do...- KJ604
- Post #10
- Forum: KJ General Discussion
-
K
KJ Transponder Key with Remote
I have a black key rexactly like the one you pictured in the first post. Pretty sure mine has a chip in it because I have an immobilizer. I got 2 of the same key when I bought my jeep used. Also pretty sure they are factory key- KJ604
- Post #7
- Forum: KJ General Discussion
-
K
Smoke coming out the air filter
yea if the coil isnt firing then you are not burning the fuel. So that injector should be unplugged.- KJ604
- Post #8
- Forum: KJ General Discussion
-
K
Smoke coming out the air filter
Do you just have the coil unplugged and that's why you say 5 cylinder? If so you need to unplug the injector for that cylinder as well otherwise it will be soaked with fuel and this can be bad for the cylinder- KJ604
- Post #6
- Forum: KJ General Discussion
-
K
KJ604's build thread
Oh gotcha. Yes definitely get a press it will come in handy both removing old and installing new. To get my old ones out I put a few drill holes in the rubber then used the press to press the center metal piece out. Then i took a hacksaw and cut the outer metal piece though. Then I smashed the...- KJ604
- Post #85
- Forum: KJ General Discussion
-
K
OME 60069 shocks - used lightly
Shocks are off the vehicle now no longer being used. 2500kms on them- KJ604
- Post #2
- Forum: For Sale Forum
-
K
KJ604's build thread
The LCA bushings? I drilled and cut the old ones out and then pressed/hammered the new ones in.- KJ604
- Post #81
- Forum: KJ General Discussion
-
K
KJ604's build thread
Ok so new stabilizer bar bushings installed and got the lca/clevis bushings replaced today too. I will say that anyone who is doing a lift on a jeep that has never had one before should replace these lca bushings too. They make quite a difference in the hub to fender measurements if they are...- KJ604
- Post #79
- Forum: KJ General Discussion
-
K
KJ604's build thread
I guess we'll see what happens when I put everything together and put it on the ground. But it doesn't really seem like the springs were the problem right now. I'm not going to spring for an air system. If this doesn't work I will get at close to level as I can with the clevis spacers- KJ604
- Post #78
- Forum: KJ General Discussion
-
K
KJ604's build thread
ok so got some good things happening today. The N132L's are installed. The y-link extension is installed. I was having the problem with the DS being alot shorter than the PS. I got the springs replaced under warranty. I had the old ones taken apart today to install the new springs but now that...- KJ604
- Post #76
- Forum: KJ General Discussion
-
K
Kingston Peak 4 Wheel Trip
thanks Jharris. I have full mopar skids so maybe i will attempt this- KJ604
- Post #5
- Forum: KJ General Discussion
-
K
replaced clevis bushings, some ?'s
the ball joint press is nessecary to install them?- KJ604
- Post #11
- Forum: KJ General Discussion
-
K
Kingston Peak 4 Wheel Trip
Looks like fun! With your front bumper trimmed like that have you had to put any extra armor up front or not? Ive thought about doing that but not sure if it exposes anything you wouldn't want exposed.- KJ604
- Post #2
- Forum: KJ General Discussion
-
K
Overflow tube dripping
I suppose there could be a difference between the model years. On my 05 when the selector is in feet only or feet + defrost or defrost only positions the AC pump will cycle regardless of the position of the AC switch. I could hear the clutch kicking in and out. Also when looking at the back of...- KJ604
- Post #15
- Forum: KJ General Discussion
-
K
replaced clevis bushings, some ?'s
what kind of press do you need to press in the new bushing? since i have to take my front end apart again im going to replace these bushings as well. Everything can be done without removing LCA?- KJ604
- Post #9
- Forum: KJ General Discussion
-
K
Overflow tube dripping
The AC will also cycle in the feet only position. you can disable this by removing the climate controls and putting tape or something to cover the contact for the AC on the rear of the controls. I put tape on the contacts so that the only time the AC turns on automatically (without having the AC...- KJ604
- Post #12
- Forum: KJ General Discussion
-
K
DWM Seeks AJP For Wild Weekend, Maybe More
According to google maps i can get there in 36 hours which means I could probably do it in 30. 4075km(2500 miles) Haha sadly I dont think ill be able to make it out for this one, although I wish I could even just to help. Ive got a stack of new parts building up myself and another rainy...- KJ604
- Post #286
- Forum: Lift Kit Discussion
