Search results
-
Ironman lift pics added Pg 2 and 5
Hi Tom, Thank anyway for confirming :) as of the ABS wires i cant see any kind of damage so far ,maybe will remove the wheels and have a closer look. but i remeber the guys used WD40 to remove the sensors ,can that affect the operation of sensors ? BR, Ahmed- a_ibrahem
- Post #115
- Forum: Lift Kit Discussion
-
OK alignment gurus...
Another shop made alignment for camper and toe ,they say caster on max adjust How you guys align caster with JBA arms ?- a_ibrahem
- Post #18
- Forum: KJ General Discussion
-
Ironman lift pics added Pg 2 and 5
Hi Bob, I just got mail from "Marlin Gehman" ,what a response :rockit: and he confirmed that washer should be between boot and spindle ,as i install it. and i tried it other way ,but not working ball joint screw to thick to go all the way in the spindle hole ,and washer inner diameter...- a_ibrahem
- Post #111
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Yes correct ,I'm having rubber hocky buck with hole inside to to give higher bump stop and protect greasing point Till I receive the longer bump stops from US Any I puts for the washer between boot and spindle ? Do I have to remove it and but it between spindle and nut ?- a_ibrahem
- Post #108
- Forum: Lift Kit Discussion
-
OK alignment gurus...
OK so back to same shop for alignment after the JBA arms installed , and nothing came within the factory tolerance ,before the arms Toe and Camber where ok only caster was bad now the same guy cant get anything within the factory settings ? any advise ?- a_ibrahem
- Post #14
- Forum: KJ General Discussion
-
Ironman lift pics added Pg 2 and 5
OK so first mistake done :( They installed the washer between the boot and spindle already. is it too bad ? and i still hear minor bangs but now only on left side not sure what causing it , and the alignment guy couldn't align anything AT ALL after the Al's arms its even worse :( i...- a_ibrahem
- Post #105
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Ok just got the Al's arms ,it came with thick washer dont know where to install this ,before the nut or between the blue rubber housing and the hub ?- a_ibrahem
- Post #103
- Forum: Lift Kit Discussion
-
Offsets, Backspace, and other wheel info
what is bad about spacers ? and Is it required to run 245/75/16 or 255/70/16 ?- a_ibrahem
- Post #38
- Forum: Tires / Wheels
-
Ironman lift pics added Pg 2 and 5
Ok thanks alot guys for the quick response ,i have ordered a set of JBA arms and hopefully installing them today if they arrive. and regarding the longer pump stops ,is it still required with the new UCA arms ? and do i need to repaint the springs in the affected area so they dont rust ...- a_ibrahem
- Post #102
- Forum: Lift Kit Discussion
-
Offsets, Backspace, and other wheel info
So i f i add 1-1.5 spacer to stock steel wheels 5-5.5 inch BS ,will it be same result ?- a_ibrahem
- Post #36
- Forum: Tires / Wheels
-
Ironman lift pics added Pg 2 and 5
yeah just saw this today :( , there is two marks on the spring on each ,looks like its hitting on the UCA is it because of short pump stopper or the stock UCA arm and i need to get the Al's UCA ? i think my stock UCA is almost dead anyway Please advise guys BR, Ahmed- a_ibrahem
- Post #98
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Hey Bob, I have done the alignment on computerised rack ,and had the sway bar joins loosen and tightened again with full load on ground ,but no change in that small hit on pumps. what do you mean by ( The sway bar links would typically be removed ) you mean removing totally ? or just...- a_ibrahem
- Post #96
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Hi Tom, Ok at first i think they tightend the sway bar with car in air ,then there was kind of minor harsh hit on pumps. then yesterday i did computerized alignment and let them tighten it again with load on ground. but they couldnt do the caster left and right they sayed its on maximum...- a_ibrahem
- Post #95
- Forum: Lift Kit Discussion
-
OK alignment gurus...
Hey Bob, have done the alignment today ,have similar issue with stock Arms Caster is on max adjust as per mechanic , see attached report ,looks similar to yours might be same machine or something :) any ideas ? BR, Ahmed- a_ibrahem
- Post #10
- Forum: KJ General Discussion
-
Offsets, Backspace, and other wheel info
OK guys am totally lost now with numbers , i just installed OME lift without any extras ,and i have now 245/70/16 on stock steel wheels with no rubbing even before the lift. but i wana go bigger tires ,was thinking about 245/75/16 or 255/70/16 so do i need to change the wheels on both...- a_ibrahem
- Post #33
- Forum: Tires / Wheels
-
-
Ironman lift pics added Pg 2 and 5
In what situation will the rear shocks extend so i can avoid it ? mostly am into sand driving. am not sure if they lossen the sway bar while installing the lift ,is a must do ? if they have loosen it then i belive they have tighten it again while car is in the air. yes i got it aligned...- a_ibrahem
- Post #92
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Hello guys, So i got the OME 927 +NS131 front and 948 +N132 rear installed, it give around 2 inch of lift ,i feel it rides better than stock and i like the new height just one thing there some kind of kick or hit when i go over speed pump ,but only in front end. i feel like the springs are...- a_ibrahem
- Post #89
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Yes Helps much Bob, thanks alot.- a_ibrahem
- Post #88
- Forum: Lift Kit Discussion
-
Ironman lift pics added Pg 2 and 5
Yeah i know they have them ,but i wanted to get the parts localy here without shipping ,what difference will it make the normal or the Long ones ? and about tires can i fit 245/75/16 under the OME kit ? Thanks Tom- a_ibrahem
- Post #84
- Forum: Lift Kit Discussion
