Search results

  1. KJowner

    2004 Jeep Liberty Rear End Issue

    Check the front lower ball joint and track rod ends, there isn't much else at the back to look at!
  2. KJowner

    2004 Jeep Liberty Rear End Issue

    That's strange, you have done the usual causes of rear end steering. Was there no improvement at all with replacement lower arms? Try swapping the wheels front to back.
  3. KJowner

    New to jeep.

    Try unplugging the tailgate handle, there is a microswitch in there that unlatches the glass, it is known to fail and make the glass pop open randomly. If that doesn't work then you probably need to get another latch from a scrapper. Check the ABS sensor wiring, I'm guessing it's later than 04...
  4. KJowner

    Hello from Italy

    Welcome, the 2.8 is a good engine, tough and simple
  5. KJowner

    235/70/16 Front + 265/75/16 Rear?

    They aren't massively different in size & in 4x2 it shouldn't make any difference but I wouldn't use 4x4 until you have a matched set. If the Jeep feels underpowered then you may need to regear, if you're happy then save a fortune and don't bother... or put standard tyres back on, a much cheaper...
  6. KJowner

    New to jeep.

    Traction control light is probably an ABS sensor or wiring fault, a good code reader will narrow it down.
  7. KJowner

    Broken sway bar link bolt

    All that joy from one bolt LOL I'm a fanatical copperslip user, I only ever struggle once!
  8. KJowner

    Broken sway bar link bolt

    With how close those lines are I'd rather weld a nut on than blast a blow lamp in there, the welder will only heat the broken stub up.
  9. KJowner

    oil leak

    Get it nice and warm, then have a look and see where it's coming from, even if you can't see the exact location immediately it will give you an idea of where to look. A mirror on a stick is very handy for small spaces, shine a light on it and you can see round corners. Check the oil filter has...
  10. KJowner

    Bulb keeps burning out and breaking, anyone know why?

    Vibration is a killer, try an LED and make sure the holder isn't loose.
  11. KJowner

    Transmission oil cooler size

    It depends how much comes out of the guts of the gearbox and cooling pipework. I think a total fill from dry is something like 11 lts.
  12. KJowner

    Belt tensioner >> stripped@@*.* << mounting bracket

    As far as I know both of mine are original, I'll see if I can find a picture on my phone, I'm away at the moment. INA or Dayco are good quality, the others are Chinese.
  13. KJowner

    Broken sway bar link bolt

    Just make a shield from crumpled tinfoil for the lines, they are several inches away so it's only sparks you need to worry about (** as long as you can't smell fuel around there! **) I'd have no issue with welding a nut on the broken stub.
  14. KJowner

    Sensor issues

    I doubt multiple sensors are faulty, have you checked the plug and wiring?
  15. KJowner

    ABS/Traction Control disables on low traction surfaces

    To get the system checked it would be much cheaper to ask a garage with a decent scanner to do it than spend a lot of money on buying one to use once, a high end one should be able to code a replacement ABS unit too.
  16. KJowner

    What did you do to your jeep today?

    Don't boil it, bad things happen to the valve seats on the v6 if it gets hot!
  17. KJowner

    ABS/Traction Control disables on low traction surfaces

    So it goes into fault when it's asked to function. JeepJeepster has some good advice, I'd check the ground cable very carefully, maybe even run a temporary lead direct to the battery and test it. I don't think the ABS is coded, it certainly isn't on mine but mine is quite a bit older.
  18. KJowner

    oil leak

    Have you checked the engine hasn't been over filled with oil or oil spilled and running down the engine after the oil change? A leak that only happens after the oil has been changed is very odd. Clean the engine as much as possible, then start it up, (keep clear of the fan and belts!) Get a...
  19. KJowner

    New Jop, what should I do to it next?

    I'd sort the Jeep and forget the electric junk lol
  20. KJowner

    YACNS issue (Yet another crank/no start issue)

    Usually the crank angle sensor, they don't like heat when they get old.
Top