Search results
-
KK TRANSMISSION INLET AND OUTLET?
That's kind of confusing on that deal considering the filters on the bottom of both of them the 45 RE and the 545 The only thing different between the 545 and a 45 is the 5:45 has a double overdrive but there's not much difference in the housing 5:45 is just an upgraded version of the 45...- joshgoble
- Post #21
- Forum: KK General Discussion
-
KK TRANSMISSION INLET AND OUTLET?
As a fully functional complete unit Yes the discharge is a lower line because it's discharging back into the pan into the transmission but if you separate it and you want to know which one of the discharge line coming to the oil cooler it's going to be the top one- joshgoble
- Post #20
- Forum: KK General Discussion
-
KK TRANSMISSION INLET AND OUTLET?
Well that would be completely correct if you're talking about the pressure line going into the pan that's flowing through the filter and through the jet but if you're wanting to discharge out of the transmission going to the cooler pre-filter the hot oil is coming from the top port going to the...- joshgoble
- Post #19
- Forum: KK General Discussion
-
Manipulated PCM
You should be able to go in your scan tool and look up the modification code and go to the Dodge or Chrysler website and see if it matches that will tell you what parameters and codes and updates the computer should have.- joshgoble
- Post #6
- Forum: CRD KJ's Section
-
Engines & PCMs, Trans & TCMs: Exact part number matching is mandatory
Depending on the year and your equipment you can edit the PCM and TCM an match the parameters to what is needed. If you cannot get the factory PCM to flash over to the parameters you need then you can purchase one that is programmable and user friendly and can adapt just about any type of...- joshgoble
- Post #4
- Forum: Electronics
-
KK TRANSMISSION INLET AND OUTLET?
Not much difference between the 42,45,,545 in all honesty whenever you are talking about the oil cooler lines.- joshgoble
- Post #17
- Forum: KK General Discussion
-
KK TRANSMISSION INLET AND OUTLET?
There was no check valve on mine it flow either direction.- joshgoble
- Post #16
- Forum: KK General Discussion
-
KK TRANSMISSION INLET AND OUTLET?
To the best of my knowledge the low port is the return on the transmission the top port is discharge .lower port it ties into the filter .I can walk outside and look at the one I've got a part and tell you pretty quick.- joshgoble
- Post #15
- Forum: KK General Discussion
-
Replacing the 3.7 with a M111.973 2.3 L
It's a 2000 model SLK I'll be pulling everything out of and at this point it looks like the model W5A 330 and W5A 580 we're used in both Jeep and Mercedes and various other Dodges so with any luck it'll be easy to adapt to tell housing over to either the transfer case already have or not the...- joshgoble
- Post #5
- Forum: Fabrication
-
Replacing the 3.7 with a M111.973 2.3 L
That's a good question I'm not sure. But I'm hoping that the engine mounting plates are identical because this is kind of what I've researched a little bit and found. Common vehicles for W5A330: Some earlier models of Chrysler 300, Dodge Avenger, Jeep Liberty.- joshgoble
- Post #4
- Forum: Fabrication
-
2005 AC Help - What am I doing wrong?
It sounds like the expansion valve possibly was over crimped when it was put in or you didn't get all the trash out of the system and it plugged expansion valve itself when you turned it on for the first time. Or they may have put the wrong expansion valve orffise in the expansion tube I've seen...- joshgoble
- Post #9
- Forum: KJ General Discussion
-
HELP ME ON OIL TRANSMISION LINES!!
Well you could go to a wrecking yard and remove them from a vehicle you could buy a transmission line flaring tool and build your own . Or you can unscrew the plugs in the side of the transmission go back to a 1/2-in NPT threaded compression fitting for copper or steal either one. And tie in...- joshgoble
- Post #6
- Forum: KJ General Discussion
-
KK TRANSMISSION INLET AND OUTLET?
Are you replacing the original one or you just adding to the system another cooler in line for the oil to run through both of them. And if both lines are cool and you've been running in the transmissions overheating you may not have any fluid going too the transmission cooler because it...- joshgoble
- Post #14
- Forum: KK General Discussion
-
Transmission Failure
Have you had any issues with the torque converter staying locked in and it not coming out of gear- joshgoble
- Post #4
- Forum: KJ General Discussion
-
Transmission Failure
It sounds as though you have a valve body issue I would rebuild it or replace it The transmission or the computer itself should put it in the limp mode and it should only take off in a second and stay in second trying to protect the transmission. But they're notorious for bad valve bodies.- joshgoble
- Post #3
- Forum: KJ General Discussion
-
Replacing the 3.7 with a M111.973 2.3 L
Well after a lot of different Ideas and a purchase of a 06 crd liberty with the intent to do an engine swap in my 04 3.7. I ran into the small snag that I couldn't bring my self to do . Long story short I kept the 06 crd as a complete unit and fought through the transmission issues. And left my...- joshgoble
- Thread
- challenges engine swap help informational modification replacement retrofit things not to do troubleshooting
- Replies: 4
- Forum: Fabrication
-
No start issue on Liberty crd
How many miles on it. are you losing excess amount of oil between oil change and have you checked the compression. And fall short on power supply to operate the starter and the computer at the same time then it will spin and won't start. Is there any fault codes- joshgoble
- Post #11
- Forum: CRD KJ's Section
-
2.8l crd start issues.
You might test alternator and see if it has a bad field shunt . Which would cause a direct short and drain the battery in about 30 40 seconds and it would also keep it from starting. Because of his drawing that much amperage or that much juice then it doesn't have enough juice to power the...- joshgoble
- Post #8
- Forum: KJ General Discussion
-
2006 kj 2.8 crd max rpm
But if it's a normal diesel you should be able to hold that rpm all day it will run down the highway wide open at that rpm so you shouldn't have issues in the dunes letting the governor do it's job.- joshgoble
- Post #3
- Forum: CRD KJ's Section
-
2006 kj 2.8 crd max rpm
4450 is where mine has defuling start- joshgoble
- Post #2
- Forum: CRD KJ's Section
