I was mainly thinking about fule milage because it makes a big difference without the front drive line in, mileage wise around 4 to 5 miles a gallon on the crd depending on how hard you push it. I dropped from 37 miles to the gallon to 32 to 33 miles to the gallon when I reinstalled the...
the front suspension isnt the biggest problem actually isn't the hardest issue to address either the rear suspension is where my biggest issues were coming up with a disign that would function and hold is the biggest trick. So I found out after the fact I was breaking 1¼...
if they did I never seen one and don't know how they accomplished it without relocation of the uper control arms and the cv axle and angles won't allow more than 4 inches and even at 4 inches your flirting with disaster and better enjoying changing cv joints unless they...
Best to my knowledge there never was any thing larger than 4" lifts mainly because you have to relocate the upper control arm and then it's minimum 8¾" lift to 12 inches it is a pain especially when you get to relocate the the steering and length en the shaft from the...
looks like I have a incorrect #9 Plate the original was probably left on the transmission that they pulled out of it and the mount that came with the purchased transmission does not fit the crossmember or didn't it does now after som drilling and grinding I just have to get...
Well y'all may or may not be interested but I just recently put in a transfer case and transmission in a jeep crd 06 model. I was informed by the guy that multiple people have worked on this thing before me buying it. And that he replaced the transmission got another one but just couldn't find...
Well it looks like they decided to change the transmission for no apparent reason because it still has no reverse and it pops and when you go to put it in park after you put it in reverse it's spinning too fast for the PIN to set. And just easing down the road it'll bind up and pop and bind up...
is it the elm123 scanner? Does yours run a flash also and have you used that part of it? mine will wright code but I have not been brave enough to test it out
that's for sure it doesn't take much heat at all either because only got close to being In the red and it still caused the issue I have a 4.3 v6 Chevrolet that I was thinking about using since I had the complete pickup but it now has a oil bypass that went bad and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.