Looks good. What trim dye did you use if its fine asking, I’m interested in restoring the trim on the 04 opposed to spray paint with textured paint like on my 07.
Worked on the 04 KJ today swapped in a new battery and also changed the spark plugs. I know it’s not right but I installed (6) laser platinum spark plugs. The spark plugs were just sitting there and I wanted to see how much of a different it will make and it made the Jeep more zippy I’m able to...
Thank you again. I finished replacing the valve cover gaskets and oil filler neck gasket on the 04 with 162k also replaced a camshaft position sensor and did the oil change. Finally got around to working in the 04
Tommudd quick question for your earlier year kj’s did you change the rockers to the revised rockers with smaller oil weep hole or did you retain the oem rocker style?
For this particular relay/switch it controls both turn signals and hazard lights. All you need is a screw driver to to disassemble the climate control unit and remove the radio. It’s a total of (6) screws.
The turning signals/hazards for the 03.KJ weren’t working on driver side front and rear, I went ahead and replaced the Flasher Relay and I’m back on the road. Now it’s time to replace that rack and pinion bushing and I’ll be content. (Also I swapped the flasher relay from the 07.KJ since it...
I currently have the valve covers off on the 04 KJ, I was in the process of painting them but got caught up doing work on the 03 KJ. Since the valve covers are off I was like I might as well tend to the rockers but this will be my first time doing this job. Thanks
I have a replacement thermostat housing and (2) replacement 8mm bolts plus the thermostat. I actually tried to fit a few sockets on, standard and metric the only problem is pounding it in there, there is limited space with the sway bar and other Parts in the way. I was going to try and use a...
Has anyone had to deal with a stripped 8mm bolt on the thermostat housing. I was on my way to replace the thermostat when I noticed one of the bolts was rounded off to the t.
Mahle Original Valve Cover Gasket VS50325
First time using this gasket brand, usually pick up the Fel-Pro and call it a day, curious about it’s quality, had to order it from parts store wasn’t even in stock.
My advice is do passengers side first and clean off any oil sludge on valve cover bolts and also make sure to note where each valve cover bolt goes because half are stud and bolt. Plus have a lot of break cleaner and degreaser, you get a lot more room to clean bottom end of engine and other...
I bought a 04 Liberty, it had really bad valve cover leak and other things that need to be dealt with. I finished removing both valve covers today and I can’t stop myself from cleaning them up, prepping them and painting them. As for the 03 Liberty I did a oil change on it today, I was going to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.